OEM Industries
OEM Industries FD1240-D2233A 40mm CPU cooler
40 mm ball-bearing fan runs at 12 V and 0.11 A through a 3-pin connector
- ColorBlack
- TypeFan only
- Fan Size40mm
- Bearing TypeBall
- Power Connector3 Pin
- LEDNo
- Compact 40mm frame fits tight builds
- Ball bearing ensures durable, quiet operation
- 12V 0.11A draw keeps power use low
- 3-pin connector enables speed monitoring
- Plain black finish suits any chassis style
Compact 40mm form factor
The OEM Industries FD1240-D2233A is a 40 by 40 by 10 millimetre axial fan designed for tight chassis where a full-size cooler cannot fit. It draws 0.11 amps at 12 volts through a standard three-pin connector and uses a ball bearing for durable rotation. Black frame and blades keep the appearance neutral for any build.
Sustained low-speed operation
Ball-bearing construction maintains consistent RPM during continuous duty without the wear pattern seen in sleeve alternatives. The modest current draw produces a steady airflow suited to component-level cooling rather than high-wattage processor loads. Acoustic output remains proportional to the low rotational speed required for small-form-factor enclosures.
Three-pin voltage control limit
The three-pin interface adjusts speed by varying supply voltage, so minimum RPM is bounded by the motherboard's lowest voltage step. Pulse-width modulation is not available, preventing software-defined curves below that hardware floor. Builders needing finer low-speed granularity or automated profiles must verify board capabilities before purchase.
商品特色
- Compact 40mm frame fits tight builds
- Ball bearing ensures durable, quiet operation
- 12V 0.11A draw keeps power use low
- 3-pin connector enables speed monitoring
- Plain black finish suits any chassis style
商品規格
| Model | FD1240-D2233A |
|---|---|
| Color | Black |
| Type | Fan only |
| Fan Size | 40mm |
| Bearing Type | Ball |
| Power Connector | 3 Pin |
| LED | No |
商品問答
How loud and warm does the 40mm ball-bearing fan run at 12V 0.11A during continuous operation?
The 40×10mm ball-bearing fan draws 0.11A at 12V, so power draw is low; ball bearings typically run quieter and cooler than sleeve types over long periods.
What connector and voltage must my motherboard or fan header provide for this 3-pin 12V cooler?
It uses a standard 3-pin 12V connector; your board needs a 3-pin fan header supplying 12V to power and report speed.
Will the 40×10mm footprint fit alongside taller RAM or a legacy socket retention bracket I already have?
At 40×40×10mm the unit is very compact, leaving ample clearance for tall memory modules and older socket brackets.
同類商品
顧客也比較過
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear



