OWC 256GB (4x64GB) DDR5 4800 CL40 ECC Registered RDIMM server RAM
- 256GB (4 x 64GB)
- 288-Pin DDR5 ECC RD…
OWC
Eight 32 GB DDR5 5600 CL46 ECC registered RDIMMs totalling 256 GB at 1.1 V for server workloads
Capacity 256GB (8 x 32GB)
This 256GB kit contains eight 32GB DDR5 5600 RDIMM modules built for select workstations and servers. It is not compatible with standard desktop computers and cannot be mixed with unbuffered or load-reduced ECC memory. The registered design targets multi-socket platforms that require registered DIMMs for stability. Buyers needing consumer DDR5 or non-ECC memory should look elsewhere.
Each module runs at the JEDEC-defined 1.1V with CL46 latency at 5600 MT/s. The dual-rank 2Rx8 organisation and lack of heat spreaders mean thermal output follows the base specification without extra cooling overhead. Power draw scales with the eight-module population in fully loaded channels. Systems without registered ECC support will not POST with these DIMMs installed.
The package delivers eight identical 32GB RDIMMs tested together for multi-channel operation. OWC validates every module in-house to meet JEDEC and RoHS compliance for warranty-safe upgrades. No additional software, drivers or accessories are included beyond the memory itself. Installers must populate all slots according to the platform's registered DIMM population rules.
| Brand | OWC |
|---|---|
| Part Number | 5R6D52R8256K |
| Capacity | 256GB (8 x 32GB) |
| Type | 288-Pin DDR5 ECC RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.1V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Multi-channel Kit | Dual Channel Kit |
| Heat Spreader | No |
其他版本
同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。
Power off the server, open the chassis, align each module's notch with the slot key, press firmly until the retention clips lock, then repeat for all eight modules. The step often missed is verifying the memory mode in BIOS after boot to confirm the registered ECC configuration is active.
No scheduled maintenance is required for the modules themselves. Keep server air filters clean and ensure airflow over the bare PCBs since the kit has no heat spreaders. Replacement is only needed if a module fails, which is covered by the limited lifetime warranty with advanced replacement.
The 1.1V operating voltage and lack of heat spreaders mean thermal throttling or stability limits appear before bandwidth saturation. Sustained write-heavy workloads will hit the module's thermal envelope first, so adequate case airflow across all eight DIMMs is critical.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
查無符合的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?