我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Four green DDR3 ECC registered RDIMM modules with gold contacts no heat spreaders

OWC

OWC 32GB (4x8GB) DDR3 1333 PC3-10600 CL9 2Rx4 240-pin 1.5V ECC Registered RDIMM Memory Upgrade Kit

SKU CH-SNB1-F6DRC

ECC registered DDR3 kit adds 32 GB across four 8 GB modules for compatible HP ProLiant BL460c G7, BL490c G7, BL620c Gen7, BL680c Gen7 and BL685c Gen7 servers

  • Capacity32GB (4 x 8GB)
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCYes

Capacity 32GB (4 x 8GB)

  • 32GB total capacity from four 8GB modules
  • DDR3 1333 PC3-10600 CL9 server-grade speed
  • ECC registered design prevents data corruption
  • 240-pin 1.5V RDIMM fits HP ProLiant G7/Gen7 blades
  • Replaces HP part numbers including 500662B21 and 593913B21

Server memory kit

This OWC kit supplies 32GB of DDR3 ECC registered memory across four 8GB modules. It targets administrators upgrading HP ProLiant blade servers that require registered DIMMs with error correction. The modules will not work in standard desktop platforms or alongside unbuffered memory.

240-pin registered DIMMs

Each stick uses a 240-pin DDR3 interface at 1.5V with CL9 latency and a 2Rx4 organisation. The registered design adds a buffer that reduces electrical load on the server memory controller, allowing the full kit to populate compatible blade slots without signal integrity issues. No heat spreaders are fitted, so airflow in the chassis handles cooling.

HP part-number match

The kit replaces HP part numbers including 500205071, 500205171, 500206071, 500662B21, 501536001, 593913B21, A0R56A, FX622AA and FX622UT. Buyers can therefore order by the familiar HP references and receive a direct drop-in upgrade. Builders needing unbuffered memory or higher speeds must look elsewhere.

商品特色

  • 32GB total capacity from four 8GB modules
  • DDR3 1333 PC3-10600 CL9 server-grade speed
  • ECC registered design prevents data corruption
  • 240-pin 1.5V RDIMM fits HP ProLiant G7/Gen7 blades
  • Replaces HP part numbers including 500662B21 and 593913B21

商品規格

BrandOWC
Part Number1R3D32R4032S
Capacity32GB (4 x 8GB)
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemHP ProLiant BL460c G7
HP ProLiant BL490c G7
HP ProLiant BL620c Gen7
HP ProLiant BL680c Gen7
HP ProLiant BL685c Gen7

其他版本

同系列還有 5 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

Does DDR3 1333 PC3-10600 limit bandwidth on HP ProLiant Gen7 blades?

The kit runs at 1333 MT/s with CL9 timing, matching the maximum DDR3 speed the BL460c G7, BL490c G7, BL620c Gen7, BL680c Gen7 and BL685c Gen7 memory controllers support.

Will the 240-pin 2Rx4 registered DIMMs fit the HP ProLiant BL460c G7 memory slots?

Yes, each 8 GB module uses the standard 240-pin DDR3 RDIMM form factor with 2Rx4 organisation, which is the exact layout required by the listed ProLiant blade servers.

How do I install the four 8 GB ECC registered modules in a BL680c Gen7, and what step is often missed?

Populate all four modules in matched channel pairs per the server’s memory population guide, then enable ECC in the BIOS — skipping the BIOS step leaves error correction inactive.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。