我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Two small green circuit boards with castellated edges and USB connectors

Raspberry Pi

Raspberry Pi Pico 22AJ1097 RP2040 2MB Flash Pack of 2 development board

SKU CH-VW4V-04SGD

Dual-core ARM Cortex M0+ microcontroller board with 2MB flash, 26 GPIO pins, and drag-and-drop USB programming, two per pack

Name 2-pack

  • Dual-core Cortex M0+ runs up to 133 MHz for responsive real-time control
  • 2 MB on-board Flash stores code and data without external chips
  • 26 multi-function GPIO pins connect sensors, displays and actuators directly
  • Drag-and-drop USB mass-storage programming lets you start in seconds
  • Eight programmable I/O state machines create custom peripherals in hardware

Dual-core microcontroller for embedded projects

The Raspberry Pi Pico 22AJ1097 uses the RP2040 chip with two ARM Cortex M0+ cores running up to 133 MHz. Each board provides 264kB of SRAM and 2MB of on-board Flash memory. This pack of two suits hobbyists, students and engineers building custom IoT edge devices or learning microcontroller programming in C or MicroPython.

Low-power operation with minimal heat

The RP2040 draws very little current and includes sleep and dormant modes for battery-powered designs. No active cooling is required during normal use, so the boards run silently. Power is supplied over the USB 1.1 port, which also handles drag-and-drop programming via mass storage.

Castellated edges and rich I/O for integration

Each module has castellated pads for direct soldering to carrier boards. You get 26 multi-function GPIO pins, two SPI, two I2C, two UART, three 12-bit ADC channels and 16 PWM channels. Eight Programmable I/O state machines allow custom peripheral support, while an on-chip temperature sensor and accelerated floating-point libraries expand application possibilities.

商品特色

  • Dual-core Cortex M0+ runs up to 133 MHz for responsive real-time control
  • 2 MB on-board Flash stores code and data without external chips
  • 26 multi-function GPIO pins connect sensors, displays and actuators directly
  • Drag-and-drop USB mass-storage programming lets you start in seconds
  • Eight programmable I/O state machines create custom peripherals in hardware

商品規格

BrandRaspberry Pi
Model22AJ1097
Part Number22AJ1097

其他版本

同系列還有 2 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

How do I install the Pico on a carrier board and which orientation step do people get wrong?

Align the castellated edges with the carrier-board pads and solder each pad; the USB connector must face the board edge so the micro-USB port remains accessible after mounting.

What maintenance will the on-board 2MB Flash need over time?

The Flash is non-volatile and requires no scheduled maintenance; firmware updates are applied by dragging a new UF2 file onto the mass-storage device that appears when the board is plugged in.

What limit appears first when both Cortex-M0+ cores run continuously at 133 MHz?

The 264kB SRAM fills before the Flash or GPIO bandwidth, so sustained dual-core workloads must fit code and data within that memory space.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。