BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Team Group
A dual-channel 32 GB kit of DDR4 3600 memory with CL18 timing and a gray aluminium heat spreader
This kit supplies 32GB of DDR4 memory in two 16GB unbuffered modules. It is built for desktop systems that need a dual-channel configuration and run at the rated 3600 speed with CL18 timings. The gray aluminum heat spreader uses an armor-style design and high-conductivity adhesive to protect the selected ICs.
Running at 1.35V with XMP 2.0 enabled, the modules maintain the 18-22-22-42 timing set during extended workloads rather than only in short bursts. The dual-channel layout keeps bandwidth stable for rendering, compilation or long gaming sessions without throttling caused by loose sub-timings.
The aluminum alloy spreader dissipates heat passively, so the kit adds no fan noise to the build. At the rated 1.35V the power draw stays low for DDR4 at this frequency, helping overall system thermals stay manageable inside typical mid-tower cases.
| Brand | Team |
|---|---|
| Series | T-FORCE DARK Z |
| Model | TDZGD432G3600HC18JDC01 |
| Capacity | 32GB (2 x 16GB) |
| Speed | DDR4 3600 (PC4 28800) |
| CAS Latency | CL18 |
| Timing | 18-22-22-42 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| BIOS/Performance Profile | Intel XMP 2.0 |
| Color | Gray |
| Heat Spreader | Aluminum |
| Features | Armor design for perfect protection Aluminum alloy heat sink with high performance High thermal conductive adhesive Supports Intel & AMD motherboards Selected high-quality IC Supports XMP2.0 Energy saving with ultra-low working voltage |
| Lähetyspaino | 0.13 kg |
| Pakkauksen mitat | 168 × 155 × 18 mm |
The aluminum alloy heat spreader uses high thermal conductive adhesive to move heat away from the selected ICs, and the 1.35V operating voltage keeps power draw low during extended workloads.
Your motherboard needs an Intel XMP 2.0 compatible BIOS so the dual-channel kit can load its 18-22-22-42 timings automatically at 3600 MT/s.
Yes, they are standard unbuffered non-ECC DDR4 DIMMs; mixing speeds or timings will force the board to run all modules at the slowest common settings.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?