BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
Team Group
A dual-channel 32 GB kit of DDR4 3600 memory with CL18 timing and a gray aluminium heat spreader
This kit supplies 32GB of DDR4 memory in two 16GB unbuffered modules. It is built for desktop systems that need a dual-channel configuration and run at the rated 3600 speed with CL18 timings. The gray aluminum heat spreader uses an armor-style design and high-conductivity adhesive to protect the selected ICs.
Running at 1.35V with XMP 2.0 enabled, the modules maintain the 18-22-22-42 timing set during extended workloads rather than only in short bursts. The dual-channel layout keeps bandwidth stable for rendering, compilation or long gaming sessions without throttling caused by loose sub-timings.
The aluminum alloy spreader dissipates heat passively, so the kit adds no fan noise to the build. At the rated 1.35V the power draw stays low for DDR4 at this frequency, helping overall system thermals stay manageable inside typical mid-tower cases.
| Brand | Team |
|---|---|
| Series | T-FORCE DARK Z |
| Model | TDZGD432G3600HC18JDC01 |
| Capacity | 32GB (2 x 16GB) |
| Speed | DDR4 3600 (PC4 28800) |
| CAS Latency | CL18 |
| Timing | 18-22-22-42 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| BIOS/Performance Profile | Intel XMP 2.0 |
| Color | Gray |
| Heat Spreader | Aluminum |
| Features | Armor design for perfect protection Aluminum alloy heat sink with high performance High thermal conductive adhesive Supports Intel & AMD motherboards Selected high-quality IC Supports XMP2.0 Energy saving with ultra-low working voltage |
| Prepravná hmotnosť | 0.13 kg |
| Rozmery balenia | 168 × 155 × 18 mm |
The aluminum alloy heat spreader uses high thermal conductive adhesive to move heat away from the selected ICs, and the 1.35V operating voltage keeps power draw low during extended workloads.
Your motherboard needs an Intel XMP 2.0 compatible BIOS so the dual-channel kit can load its 18-22-22-42 timings automatically at 3600 MT/s.
Yes, they are standard unbuffered non-ECC DDR4 DIMMs; mixing speeds or timings will force the board to run all modules at the slowest common settings.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Žiadny jazyk nezodpovedá.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?