BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.
Team Group
A dual-channel 32 GB kit of DDR4 3600 memory with CL18 timing and a gray aluminium heat spreader
This kit supplies 32GB of DDR4 memory in two 16GB unbuffered modules. It is built for desktop systems that need a dual-channel configuration and run at the rated 3600 speed with CL18 timings. The gray aluminum heat spreader uses an armor-style design and high-conductivity adhesive to protect the selected ICs.
Running at 1.35V with XMP 2.0 enabled, the modules maintain the 18-22-22-42 timing set during extended workloads rather than only in short bursts. The dual-channel layout keeps bandwidth stable for rendering, compilation or long gaming sessions without throttling caused by loose sub-timings.
The aluminum alloy spreader dissipates heat passively, so the kit adds no fan noise to the build. At the rated 1.35V the power draw stays low for DDR4 at this frequency, helping overall system thermals stay manageable inside typical mid-tower cases.
| Brand | Team |
|---|---|
| Series | T-FORCE DARK Z |
| Model | TDZGD432G3600HC18JDC01 |
| Capacity | 32GB (2 x 16GB) |
| Speed | DDR4 3600 (PC4 28800) |
| CAS Latency | CL18 |
| Timing | 18-22-22-42 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| BIOS/Performance Profile | Intel XMP 2.0 |
| Color | Gray |
| Heat Spreader | Aluminum |
| Features | Armor design for perfect protection Aluminum alloy heat sink with high performance High thermal conductive adhesive Supports Intel & AMD motherboards Selected high-quality IC Supports XMP2.0 Energy saving with ultra-low working voltage |
| Teža pošiljke | 0.13 kg |
| Velikost pošiljke | 168 × 155 × 18 mm |
The aluminum alloy heat spreader uses high thermal conductive adhesive to move heat away from the selected ICs, and the 1.35V operating voltage keeps power draw low during extended workloads.
Your motherboard needs an Intel XMP 2.0 compatible BIOS so the dual-channel kit can load its 18-22-22-42 timings automatically at 3600 MT/s.
Yes, they are standard unbuffered non-ECC DDR4 DIMMs; mixing speeds or timings will force the board to run all modules at the slowest common settings.
Tudi v tem oddelku
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.
V čem plačujete in v čem berete cene.
Poslano iz Vaše denarnice ob blagajni
Samo za prikaz — katalog je cenovno izražen v dolarjih
Nobena valuta ne ustreza.
Izberite jezik, v katerem Vam govori spletna stran.
Ni ustreznega jezika.
Prvič tu?
Že imate račun?
Samodejne ponastavitve ni: ta trgovina ne pošilja e-pošte, zato ni enkratne povezave, ki bi jo lahko zahtevali. Pustite naslov na računu — nekdo ga bo obravnaval ročno.
Zahteva zabeležena
V Vašo elektronsko pošto ne prihaja nič — ta trgovina ne pošilja nobene e-pošte. Zahteve nekdo obravnava ročno.
Ste se spomnili?