暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Red PLA filament on a 1 kg spool, 1.75 mm diameter

eSUN

eSUN PLA Basic Filament 1.75mm 1KG Fire Engine Red

SKU CH-HS0Y-EYHSQ

PLA filament optimised for high-speed printing up to 300 mm/s with 23 colour choices

  • ColorBlack
  • TypePLA Basic Filament

color Fire Engine Red

  • Optimised fluidity enables fast printing up to 300 mm/s
  • Compatible with most FDM and high-speed 3D printers
  • Low odour, no warping or cracking for reliable prints
  • Tangle-free spool with tight diameter tolerance prevents clogs
  • Vacuum-sealed with desiccant keeps filament dry until use

Filament for fast FDM printing

eSUN PLA Basic is a 1.75 mm PLA filament formulated for high-speed FDM 3D printers. The material prints at 40-300 mm/s while keeping standard PLA ease of use. A 1 kg spool supplies enough material for many models.

Broad printer compatibility

The filament works with most FDM machines including Bambu Lab, Creality K1 series, Prusa, UltiMaker, Voron, Flashforge, Raise3D, Ender and AnkerMake models. Vacuum-sealed packaging with desiccant keeps the spool dry until first use. Tight diameter tolerance and neat winding prevent tangles and nozzle clogs.

Settings to verify before ordering

Your printer must accept 1.75 mm filament and reach a nozzle temperature of 210-230 °C with a heated bed at 45-60 °C. Fan speed should run at 100 % for best results. Recommended build surfaces are textured paper, PVP solid glue or PEI sheets.

特長

  • Optimised fluidity enables fast printing up to 300 mm/s
  • Compatible with most FDM and high-speed 3D printers
  • Low odour, no warping or cracking for reliable prints
  • Tangle-free spool with tight diameter tolerance prevents clogs
  • Vacuum-sealed with desiccant keeps filament dry until use

仕様

BrandeSUN
Model3D Printer Filament
ColorBlack
TypePLA Basic Filament

このモデルの他のバージョン

同シリーズにさらに 3点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will the 1.75 mm PLA Basic spool need any special storage or drying before I print with it?

The filament ships in a vacuum-sealed bag with a desiccant pack, so it arrives dry and ready to print; reseal the bag after each use to keep moisture out.

What is the practical ceiling for printing speed on a high-speed FDM machine using this material?

The manufacturer rates the filament for 40–300 mm/s, so 300 mm/s is the highest speed they specify for consistent results.

How hot does the nozzle and bed get during an all-day print with Fire Engine Red PLA Basic?

Nozzle temperature runs at 210–230 °C (215 °C recommended) and the heated bed at 45–60 °C with the fan at 100 %.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。