我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Red PLA filament on a 1 kg spool, 1.75 mm diameter

eSUN

eSUN PLA Basic Filament 1.75mm 1KG Fire Engine Red

SKU CH-HS0Y-EYHSQ

PLA filament optimised for high-speed printing up to 300 mm/s with 23 colour choices

  • ColorBlack
  • TypePLA Basic Filament

color Fire Engine Red

  • Optimised fluidity enables fast printing up to 300 mm/s
  • Compatible with most FDM and high-speed 3D printers
  • Low odour, no warping or cracking for reliable prints
  • Tangle-free spool with tight diameter tolerance prevents clogs
  • Vacuum-sealed with desiccant keeps filament dry until use

Filament for fast FDM printing

eSUN PLA Basic is a 1.75 mm PLA filament formulated for high-speed FDM 3D printers. The material prints at 40-300 mm/s while keeping standard PLA ease of use. A 1 kg spool supplies enough material for many models.

Broad printer compatibility

The filament works with most FDM machines including Bambu Lab, Creality K1 series, Prusa, UltiMaker, Voron, Flashforge, Raise3D, Ender and AnkerMake models. Vacuum-sealed packaging with desiccant keeps the spool dry until first use. Tight diameter tolerance and neat winding prevent tangles and nozzle clogs.

Settings to verify before ordering

Your printer must accept 1.75 mm filament and reach a nozzle temperature of 210-230 °C with a heated bed at 45-60 °C. Fan speed should run at 100 % for best results. Recommended build surfaces are textured paper, PVP solid glue or PEI sheets.

商品特色

  • Optimised fluidity enables fast printing up to 300 mm/s
  • Compatible with most FDM and high-speed 3D printers
  • Low odour, no warping or cracking for reliable prints
  • Tangle-free spool with tight diameter tolerance prevents clogs
  • Vacuum-sealed with desiccant keeps filament dry until use

商品規格

BrandeSUN
Model3D Printer Filament
ColorBlack
TypePLA Basic Filament

其他版本

同系列還有 3 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

Will the 1.75 mm PLA Basic spool need any special storage or drying before I print with it?

The filament ships in a vacuum-sealed bag with a desiccant pack, so it arrives dry and ready to print; reseal the bag after each use to keep moisture out.

What is the practical ceiling for printing speed on a high-speed FDM machine using this material?

The manufacturer rates the filament for 40–300 mm/s, so 300 mm/s is the highest speed they specify for consistent results.

How hot does the nozzle and bed get during an all-day print with Fire Engine Red PLA Basic?

Nozzle temperature runs at 210–230 °C (215 °C recommended) and the heated bed at 45–60 °C with the fan at 100 %.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。