我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Green PLA filament spool 1.75mm 1KG vacuum sealed

eSUN

eSUN PLA Basic Filament 1.75mm 1KG Green 3d printers accessory

SKU CH-6WWC-J205P

PLA filament optimised for fast printing up to 300 mm/s with low warping and precise 1.75 mm diameter on a 1 kg spool

  • ColorGreen
  • TypePLA Basic Filament

color Green

  • Fast printing up to 300 mm/s with improved fluidity
  • Wide compatibility with popular FDM and high-speed printers
  • High success rate, low odour, minimal warping or stringing
  • Tangle-free spool with tight diameter tolerance for smooth feeding
  • Vacuum-sealed packaging with desiccant keeps filament dry and dust-free

Green PLA Basic Filament 1.75mm

This green PLA Basic filament from eSUN is designed for FDM 3D printers that run at high speeds. The material adds special additives to standard PLA for better fluidity, making it a cost-effective choice for makers who want fast printing without changing hardware.

Vacuum-sealed spool with desiccant

Each 1KG spool arrives in a vacuum-sealed bag with a desiccant pack to keep the filament dry and dust-free until opened. Tight diameter tolerance and neat winding prevent tangles, so the filament feeds smoothly through the extruder and reduces the risk of nozzle clogs during long prints.

Check temperature range and bed surface

The recommended printing temperature is 215°C within a 210-230°C window, with a heated bed at 45-60°C and fan speed at 100%. Verify that your printer can reach these settings and that you use a compatible build surface such as textured paper, PVP solid glue or PEI for best adhesion.

商品特色

  • Fast printing up to 300 mm/s with improved fluidity
  • Wide compatibility with popular FDM and high-speed printers
  • High success rate, low odour, minimal warping or stringing
  • Tangle-free spool with tight diameter tolerance for smooth feeding
  • Vacuum-sealed packaging with desiccant keeps filament dry and dust-free

商品規格

BrandeSUN
Model3D Printer Filament
ColorGreen
TypePLA Basic Filament

其他版本

同系列還有 3 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

What filament diameter does this 1.75 mm PLA spool use, and what printing speed range does it support?

The filament is 1.75 mm in diameter and prints reliably from 40 to 300 mm/s.

What spool size and weight must my printer accommodate for this 1 kg reel?

The spool holds 1 kg (2.2 lb) of filament; ensure your holder accepts a standard 1 kg cardboard spool.

At what nozzle and bed temperatures should I print this green PLA, and what common mistake causes poor adhesion?

Print at 210–230 °C nozzle and 45–60 °C bed; forgetting to enable 100 % fan speed often leads to warping.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。