暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Six green DDR5 RDIMM modules in a row, no heat spreaders, 288 gold pins visible

NEMIX RAM

NEMIX RAM 384GB 6x64GB DDR5 4800 CL40 ECC RDIMM Supermicro H14DSG-OM memory upgrade

SKU CH-GHCW-SHTD1

384 GB DDR5-4800 ECC RDIMM kit in six 64 GB modules at CL40 and 1.1 V for the Supermicro H14DSG-OM motherboard

  • Capacity384GB (6 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 384GB 6X64GB

他に 30点の構成を表示
  • 384 GB total capacity from six 64 GB modules
  • DDR5-4800 speed with CL40 latency and 1.1 V operation
  • ECC and registered design prevents silent data corruption under load
  • 288-pin RDIMM form factor matches Supermicro H14DSG-OM requirements
  • Built with major OEM Samsung, Micron, or Hynix chips

384GB DDR5 ECC RDIMM Kit for Supermicro H14DSG-OM

This 384GB kit contains six 64GB DDR5 4800 Registered ECC RDIMMs built to the exact rank, voltage and timing the Supermicro H14DSG-OM memory controller expects. It is for administrators who need the full 384GB capacity recognised at rated speed without manual tuning. Buyers whose platforms require UDIMM, SODIMM or non-ECC memory cannot use this kit.

Sustained Enterprise Stability

Registered architecture offloads the memory controller so every slot runs fully populated at full capacity under continuous load. ECC corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots during long-running workloads. The 1.1V operating voltage and CL40 timing are maintained across all six modules without throttling.

2Rx4 Registered ECC at 1.1V DDR5 4800

The single specification that decides fitment is the 2Rx4 Registered ECC organisation at 1.1V DDR5 4800 with CL40 latency in a 288-pin RDIMM form factor. Your motherboard manual must confirm support for this exact rank structure, voltage and population rule before purchase.

特長

  • 384 GB total capacity from six 64 GB modules
  • DDR5-4800 speed with CL40 latency and 1.1 V operation
  • ECC and registered design prevents silent data corruption under load
  • 288-pin RDIMM form factor matches Supermicro H14DSG-OM requirements
  • Built with major OEM Samsung, Micron, or Hynix chips

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-924K6
Capacity384GB (6 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content384GB 6X64GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How much power do six 64 GB DDR5 4800 RDIMMs draw when the Supermicro H14DSG-OM runs continuously?

Each module operates at 1.10 V and the DDR5 standard moves power management onto the DIMM itself, so total draw scales with the 384 GB capacity you populate rather than a fixed board limit.

What motherboard slot type and population rules must the Supermicro H14DSG-OM already have to accept this 6 x 64 GB kit?

The board needs 288-pin DDR5 RDIMM slots and must support 2Rx4 registered ECC modules at 4800 MT/s; consult the manual for the exact population order required for all six slots.

Will the registered ECC design of these DDR5 4800 CL40 modules keep the server stable if I fill every slot on the H14DSG-OM?

Yes — the registered architecture buffers address and command signals so the memory controller can drive all six 64 GB 2Rx4 DIMMs at the rated 4800 MT/s, while on-die ECC corrects single-bit errors in real time.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。