暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

NEMIX RAM

NEMIX RAM 576GB (6x96GB) DDR5 4800 CL40 2Rx4 ECC RDIMM Supermicro H13DSH memory upgrade

SKU CH-D9DW-6VEMG

A 576 GB DDR5 ECC RDIMM kit of six 96 GB modules running at 4800 MHz CL40, registered and 2Rx4 for full-capacity stability on the Supermicro H13DSH motherboard

  • Capacity576GB (6 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • Massive 576 GB capacity via six 96 GB modules
  • DDR5-4800 speed with CL40 latency for responsive throughput
  • Registered ECC design catches and corrects single-bit errors
  • 1 V operation keeps power draw low at full load
  • Validated for Supermicro H13DSH motherboard with 288-pin RDIMM slots

Server memory kit for Supermicro H13DSH

This 576 GB kit contains six 96 GB DDR5-4800 registered ECC RDIMMs built for the Supermicro H13DSH motherboard. The modules match the board's 288-pin RDIMM requirement and registered architecture so every slot can be populated at full capacity. System administrators upgrading memory-bound workloads on this platform receive the exact rank, voltage and timing the controller expects.

Verified fitment and enterprise stability

The kit is spec-matched to the H13DSH population rules, eliminating guesswork about DIMM order or capacity limits. Registered buffering offloads the memory controller while on-die ECC corrects single-bit errors in flight, preventing silent data corruption and unplanned reboots in production environments. Buyers who need unbuffered UDIMMs or laptop SODIMMs cannot use this product.

DDR5-4800 CL40 at 1.1 V

The modules run at DDR5-4800 (PC5-38400) with CL40 latency and 1.1 V operation, the single specification that determines whether the memory controller recognises full capacity at rated speed. Consult your motherboard manual for supported capacities and installation steps before purchase.

特長

  • Massive 576 GB capacity via six 96 GB modules
  • DDR5-4800 speed with CL40 latency for responsive throughput
  • Registered ECC design catches and corrects single-bit errors
  • 1 V operation keeps power draw low at full load
  • Validated for Supermicro H13DSH motherboard with 288-pin RDIMM slots

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K6
Capacity576GB (6 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content576GB 6X96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will the registered ECC RDIMM modules need any firmware updates or periodic replacement?

The 288-pin DDR5 4800 CL40 2Rx4 registered ECC RDIMMs operate at 1.10 V with no heat spreader; they are solid-state components with no moving parts and require no firmware updates or scheduled replacement under normal server operation.

What is the first limit reached when all six slots run continuously at DDR5 4800?

With six 96 GB modules populating every channel at 4800 MT/s, the memory controller's maximum supported capacity and signal-integrity budget are reached before thermal or power limits, so total 576 GB capacity is the binding constraint.

How much heat and power does the 576 GB kit produce during 24/7 operation?

Each 96 GB 2Rx4 RDIMM runs at 1.1 V without a heat spreader; the registered buffer reduces controller load, so typical sustained power stays within standard DDR5 RDIMM thermal envelopes for densely populated server boards.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。