暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two green DDR5 RDIMM modules with gold contacts and black chips, no heat spreader

NEMIX RAM

NEMIX RAM 64GB (2x32GB) DDR5-4800 CL40 2Rx8 ECC Registered RDIMM Supermicro H14DSG-O-CPU memory upgrade

SKU CH-AXDH-Y07TD

A 64 GB DDR5-4800 ECC Registered RDIMM kit built to the exact rank, voltage and timing the Supermicro H14DSG-O-CPU requires for full-capacity operation

  • Capacity64GB (2 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 64GB 2X32GB

他に 30点の構成を表示
  • 64 GB capacity with two 32 GB modules for full server memory population
  • DDR5 4800 speed rated at PC5-38400 for rated data throughput
  • CL40 CAS latency at 1.1 V for specified timing and power profile
  • Registered ECC 2Rx8 design corrects single-bit errors and buffers every slot
  • Verified 288-pin RDIMM fitment for Supermicro H14DSG-O-CPU motherboard

Exact-fit DDR5-4800 ECC kit for Supermicro

This 64 GB kit delivers two 32 GB DDR5-4800 Registered ECC RDIMMs built to the memory controller's precise rank, voltage and timing requirements. It targets administrators upgrading a Supermicro H14DSG-O-CPU server who need guaranteed recognition at full capacity and rated speed.

Registered architecture

The buffered design offloads the memory controller so every slot runs fully populated at full capacity while ECC corrects single-bit errors on the fly. The 288-pin RDIMM form factor matches the board's physical and electrical requirements — not a UDIMM or SODIMM — and operates at 1.1 V with CL40 latency.

Replaces mixed-capacity or slower DDR5 modules

The jump is worth it when your current configuration limits total capacity, forces reduced speeds or leaves ECC unpopulated. Buyers who need non-ECC UDIMMs, SODIMMs or a different DDR generation cannot use this kit.

特長

  • 64 GB capacity with two 32 GB modules for full server memory population
  • DDR5 4800 speed rated at PC5-38400 for rated data throughput
  • CL40 CAS latency at 1.1 V for specified timing and power profile
  • Registered ECC 2Rx8 design corrects single-bit errors and buffers every slot
  • Verified 288-pin RDIMM fitment for Supermicro H14DSG-O-CPU motherboard

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-328K2
Capacity64GB (2 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB 2X32GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Does the DDR5-4800 PC5-38400 interface run at 4800 MT/s on the Supermicro H14DSG-O-CPU?

Yes. The kit is specced at DDR5 4800 (PC5-38400) and the motherboard's memory controller recognises that speed, so both modules operate at the rated 4800 MT/s when installed correctly.

What physical slot and form factor do these modules need on the H14DSG-O-CPU board?

They are 288-pin DDR5 RDIMMs. The H14DSG-O-CPU requires registered DIMMs in its DDR5 DIMM slots — UDIMMs or SODIMMs will not fit or function.

What is the correct population order for the two 32 GB sticks, and which step do builders often miss?

Check the motherboard manual for the approved DIMM population sequence; a common mistake is inserting the modules in the wrong slot order, which prevents the system from recognising the full 64 GB capacity.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。