暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

NEMIX RAM

NEMIX RAM DDR5 256GB (4×64GB) 4800MHz CL40 1.1V ECC RDIMM Supermicro H14DSH memory upgrade

SKU CH-DHCZ-VFTCB

A 256GB kit of four 64GB DDR5 4800MHz ECC registered RDIMMs built for the Supermicro H14DSH motherboard

  • Capacity256GB (4 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • 256 GB total capacity from four 64 GB modules
  • DDR5 4800 MHz speed with CL40 latency
  • 1 V operating voltage for efficient power use
  • Registered ECC RDIMM design prevents data errors
  • Verified compatibility with Supermicro H14DSH motherboard

Exact-match DDR5-4800 upgrade for Supermicro H14DSH

This 256GB kit delivers four 64GB DDR5 RDIMMs at 4800MHz PC5-38400 with CL40 timing and 1.10V operation. Registered ECC architecture meets the precise rank, voltage and timing requirements of the Supermicro H14DSH motherboard so the system recognises full capacity at rated speed.

Sustained enterprise workload stability

Registered buffering offloads the memory controller allowing every slot to run fully populated at full capacity without signal degradation. ECC corrects single-bit errors on the fly preventing silent data corruption and unplanned reboots during continuous production workloads.

Bare-module form factor and population rules

Modules ship without heat spreaders as standard 288-pin RDIMMs using major OEM Samsung, Micron or Hynix chips. Installation must follow the motherboard manual for supported capacities and approved DIMM population order to ensure proper operation. Buyers needing UDIMM or SODIMM form factors cannot use this kit.

特長

  • 256 GB total capacity from four 64 GB modules
  • DDR5 4800 MHz speed with CL40 latency
  • 1 V operating voltage for efficient power use
  • Registered ECC RDIMM design prevents data errors
  • Verified compatibility with Supermicro H14DSH motherboard

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-924K4
Capacity256GB (4 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 4X64GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How much power does the 1.1 V DDR5 RDIMM kit draw when the server runs continuously?

Each module operates at 1.10 V; the registered design reduces electrical load on the memory controller so all four slots can stay populated at the rated 4800 MT/s speed.

What motherboard slot and memory type are required for this 288-pin RDIMM kit to function?

The kit needs a Supermicro H14DSH motherboard with DDR5 RDIMM slots; it will not fit UDIMM or SODIMM sockets.

Will these CL40 4800 MT/s modules run at their rated speed alongside slower DDR5 RDIMMs already installed in the same system?

The memory controller typically clocks all populated slots to the slowest module's speed, so mixing with slower DDR5 RDIMMs will reduce overall performance.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。