暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

NEMIX RAM

NEMIX RAM DDR5 4800 1.5TB 12x128GB ECC RDIMM Supermicro H14DSH

SKU CH-4HX7-CJ98Y

A 1.5 TB kit of twelve 128 GB DDR5 4800 registered ECC RDIMMs at 1.1 V CL40, built for full-capacity operation on Supermicro H14DSH motherboards

  • Capacity1.5TB (12 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • 5TB capacity from twelve 128GB modules
  • DDR5 4800 speed with CL40 latency at 1.1V
  • ECC and registered design prevents data errors
  • 288-pin RDIMM form factor fits Supermicro H14DSH
  • Major OEM chips from Samsung, Micron, Hynix

Capacity and fit

This kit delivers 1.5TB of DDR5 memory across twelve 128GB modules, built specifically for the Supermicro H14DSH motherboard. The 288-pin RDIMM form factor and 2Rx4 registered ECC design match the board's memory controller requirements exactly, so the system recognises the full capacity at the rated 4800MHz speed.

Registered DDR5 limits

Registered DDR5 at 4800MHz with CL40 latency and 1.10V operation offloads electrical load from the memory controller, allowing all twelve slots to run fully populated without signal degradation. ECC corrects single-bit errors on the fly, preventing silent data corruption in production workloads, but the modules must be installed in the precise population order the motherboard manual specifies.

Build and daily implications

The modules use major OEM Samsung, Micron or Hynix chips without heat spreaders, relying on server chassis airflow for cooling. The 288-pin registered connector ensures a secure mechanical seat in each DIMM slot, while the matched rank, voltage and timing profile means the firmware initialises the kit at full speed without manual tuning.

特長

  • 5TB capacity from twelve 128GB modules
  • DDR5 4800 speed with CL40 latency at 1.1V
  • ECC and registered design prevents data errors
  • 288-pin RDIMM form factor fits Supermicro H14DSH
  • Major OEM chips from Samsung, Micron, Hynix

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-724K12
Capacity1.5TB (12 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1.5TB 12X128GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Should I choose the 1.5TB kit with twelve 128GB modules or a smaller capacity for my Supermicro H14DSH?

The 1.5TB kit fills all twelve slots with 128GB 2Rx4 registered ECC RDIMMs, giving maximum supported capacity at DDR5 4800 speed.

What does the DDR5 4800 rating mean once the modules are installed in the server?

The kit runs at 4800 MT/s with CL40 latency at 1.1V, delivering PC5-38400 bandwidth when the memory controller is fully populated with registered DIMMs.

How does the 288-pin registered ECC interface affect real-world stability and capacity limits?

Registered buffering lets every slot run fully populated at 1.5TB while ECC corrects single-bit errors on the fly, preventing silent data corruption.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。