暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

NEMIX RAM

NEMIX RAM DDR5 4800 128GB (4x32GB) ECC RDIMM CL40 1.1V 2Rx8 Supermicro H14DSG-OM memory upgrade

SKU CH-PR1M-7YEXF

A 128GB DDR5-4800 ECC RDIMM kit built for the Supermicro H14DSG-OM, running at 1.1V CL40 with 2Rx8 registered chips for full-slot stability

  • Capacity128GB (4 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • 128 GB total capacity with four 32 GB modules for maximum density
  • DDR5 4800 speed rated at PC5-38400 for high bandwidth
  • Registered ECC RDIMM design corrects single-bit errors and buffers signals
  • CL40 latency at 1.10 V for efficient operation
  • Verified fitment for Supermicro H14DSG-OM motherboard

128GB DDR5 ECC RDIMM kit for Supermicro H14DSG-OM

This 128GB kit contains four 32GB DDR5-4800 registered DIMMs built to the exact rank, voltage and timing the Supermicro H14DSG-OM memory controller expects. It is intended for administrators upgrading that specific server platform with validated ECC memory.

Registered ECC limits for DDR5-4800

The registered architecture buffers address and command signals so every slot can run fully populated at the rated 4800 MT/s speed. ECC corrects single-bit errors on the fly, preventing silent data corruption. The modules operate at 1.1V with CL40 latency and require a motherboard that supports 288-pin RDIMMs.

2Rx8 organisation decides fitment

Each module uses a 2Rx8 rank configuration that must match the motherboard's qualified vendor list and population rules. If your system requires a different rank structure or a UDIMM form factor, this kit will not be recognised or will run at reduced capacity. Check the manual before purchase.

特長

  • 128 GB total capacity with four 32 GB modules for maximum density
  • DDR5 4800 speed rated at PC5-38400 for high bandwidth
  • Registered ECC RDIMM design corrects single-bit errors and buffers signals
  • CL40 latency at 1.10 V for efficient operation
  • Verified fitment for Supermicro H14DSG-OM motherboard

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-328K4
Capacity128GB (4 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB 4X32GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Should I choose the 128GB 4x32GB kit or a different capacity for my Supermicro H14DSG-OM?

The 128GB kit provides four 32GB modules that match the board's 2Rx8 rank requirement and 1.1V voltage, allowing full population at the rated DDR5 4800 speed.

What does the DDR5 4800 rating mean once the modules are installed in the server?

The memory controller will run the kit at 4800 MT/s with CL40 latency, delivering the PC5-38400 bandwidth the platform expects when all four slots are populated.

How does the 288-pin RDIMM interface affect what I can actually use?

The registered 288-pin RDIMM form factor is required by the H14DSG-OM; it offloads the memory controller so every slot runs fully populated at 128GB total capacity with ECC active.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。