暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

NEMIX RAM

NEMIX RAM DDR5 4800 96GB 6x16GB ECC RDIMM Supermicro H13DSH memory upgrade

SKU CH-32CD-HT8QQ

A 96 GB DDR5 ECC RDIMM kit of six 16 GB modules at 4800 MT/s, CL40, 1.1 V, 288-pin, validated for the Supermicro H13DSH motherboard

  • Capacity96GB (6 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • 96 GB total capacity in a 6 × 16 GB kit for high-density server workloads
  • DDR5-4800 speed with CL40 latency for rated throughput on supported platforms
  • 1 V operation reduces power draw per module in fully populated systems
  • Registered ECC RDIMM architecture corrects single-bit errors and buffers signals for stability
  • Exact-fit 288-pin form factor validated for Supermicro H13DSH motherboard

Supermicro H13DSH 96GB DDR5 ECC RDIMM Kit

This 96GB kit contains six 16GB DDR5-4800 registered ECC RDIMMs built for the Supermicro H13DSH motherboard. Each module runs at 1.10V with CL40 latency and a 1Rx8 organization. The 288-pin registered design matches the board's memory controller requirements for full-capacity recognition at rated speed.

Suited For Supermicro H13DSH Server Builds

Administrators expanding a Supermicro H13DSH system to 96GB across six populated slots will receive the exact rank, voltage and timing the platform expects. Builders using consumer UDIMMs, SODIMMs or non-ECC modules should look elsewhere because the board requires registered ECC RDIMMs to operate correctly.

1Rx8 Registered ECC Architecture Decides Fit

The single-rank registered ECC layout with 1.10V operation is the specification that determines compatibility. If your server manual calls for a different rank structure, voltage or unbuffered DIMMs, this kit will not function as intended.

特長

  • 96 GB total capacity in a 6 × 16 GB kit for high-density server workloads
  • DDR5-4800 speed with CL40 latency for rated throughput on supported platforms
  • 1 V operation reduces power draw per module in fully populated systems
  • Registered ECC RDIMM architecture corrects single-bit errors and buffers signals for stability
  • Exact-fit 288-pin form factor validated for Supermicro H13DSH motherboard

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-618K6
Capacity96GB (6 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB 6X16GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What thermal and acoustic behaviour should I expect when the DDR5 4800 1.1V 288-pin RDIMM kit runs continuously?

The modules operate at 1.10 V with no heat spreader, so they rely on chassis airflow; registered buffering reduces electrical load on the memory controller, keeping power draw steady during sustained workloads.

Which motherboard and memory configuration must already be present for this 6 x 16 GB kit to function?

A Supermicro H13DSH motherboard with six available 288-pin DDR5 RDIMM slots, populated according to the board's validated population order, is required for the 96 GB kit to be recognised at full capacity and rated speed.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。