暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Sixteen green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM MR38400-724K16 2TB 16x128GB DDR5 4800MHz CL40 1.1V ECC Registered RDIMM memory upgrade

SKU CH-98N7-MZHRA

A 2 TB DDR5 server memory kit of sixteen 128 GB registered ECC RDIMMs running at 4800 MHz with CL40 latency and 1.1 V operation, validated for the Supermicro H14DSG-O-CPU motherboard

  • Capacity2TB (16 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 2TB 16X128GB

他に 30点の構成を表示
  • 2TB capacity with 16 matched 128GB modules for full server population
  • DDR5 4800 speed and CL40 latency deliver rated bandwidth for demanding workloads
  • Registered ECC architecture offloads the controller and corrects single-bit errors automatically
  • 1V operation reduces power draw across all 16 DIMMs in dense configurations
  • Verified fit for Supermicro H14DSG-O-CPU with 288-pin RDIMM form factor

Exact-match DDR5 upgrade

This 2 TB kit contains 16 modules of 128 GB DDR5-4800 ECC Registered RDIMM. It is built for the Supermicro H14DSG-O-CPU motherboard and matches the rank, voltage and timing that board expects. Every stick runs at the rated 4800 MT/s speed when fully populated.

Replaces partial or mismatched kits

When a server runs with fewer than 16 modules or mixes ranks and speeds the memory controller often down-clocks or limits capacity. Installing this matched 16-piece kit restores full 2 TB capacity at CL40 and 1.1 V across all slots without manual tuning.

Suits admins scaling one H14DSG-O-CPU system

The kit is designed for administrators who need maximum registered ECC capacity on this specific Supermicro platform. Builders targeting other motherboards, consumer platforms or unbuffered memory should verify their manual first because population rules and form factor differ.

特長

  • 2TB capacity with 16 matched 128GB modules for full server population
  • DDR5 4800 speed and CL40 latency deliver rated bandwidth for demanding workloads
  • Registered ECC architecture offloads the controller and corrects single-bit errors automatically
  • 1V operation reduces power draw across all 16 DIMMs in dense configurations
  • Verified fit for Supermicro H14DSG-O-CPU with 288-pin RDIMM form factor

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-724K16
Capacity2TB (16 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content2TB 16X128GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will these 288-pin DDR5 RDIMMs fit the Supermicro H14DSG-O-CPU motherboard slots?

Yes, the 288-pin Registered DDR5 form factor matches the H14DSG-O-CPU DIMM sockets exactly; the kit is verified for that board.

What population order should I follow when installing all 16 modules on the H14DSG-O-CPU?

Fill the slots in the sequence shown in the Supermicro H14DSG-O-CPU manual — typically one DIMM per channel per CPU first, then the second rank — to ensure the board trains at 4800 MHz.

Do the Samsung, Micron or Hynix chips on these RDIMMs require any firmware updates or periodic maintenance?

No firmware updates are needed for the DRAM; the modules are sealed with no heat spreader, so only standard server dust cleaning and ECC error-log monitoring apply.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。