Intel Optane SSD DC P4801X 200GB M.2 22110 enterprise SSD SSDPEL1K200GA01
- M.2 22110
- 200GB
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Intel
800 GB add-in-card enterprise SSD delivering up to 2,800 MB/s sequential reads and 460,000 random read IOPS over PCIe 3.0 x4
This Intel DC P3700 add-in card delivers 800GB of MLC storage over a PCI-Express 3.0 x4 interface. It targets servers and workstations that need consistent low-latency random performance. The half-height half-length form factor fits standard expansion slots. It is not suited for builds that require a 2.5-inch or M.2 drive bay.
The card installs directly into an available PCI-Express 3.0 x4 slot without cables or drive cages. Idle power sits at 4W while active write consumption stays below 25W and read below 11W. Operating temperatures range from 0°C to 55°C. Systems without a spare x4 slot or adequate airflow cannot use this drive.
Sequential speeds reach 2800 MBps read and 2000 MBps write while 4KB random writes sustain 17,500 IOPS. Read and write latency is rated at 20µs. The 2,000,000-hour MTBF supports heavy-duty cycles. Workloads needing more than 800GB capacity or higher random write throughput will outgrow this device.
| Brand | Intel |
|---|---|
| Series | DC P3700 |
| Model | SSDPEDMD800G401 |
| Form Factor | AIC |
| Capacity | 800GB |
| Memory Components | MLC |
| Interface | PCI-Express 3.0 x4 |
| Controller | Intel |
| Max Sequential Read | Up to 2800 MBps |
| Max Sequential Write | Up to 2000 MBps |
| 4KB Random Read | Up to 460,000 IOPS |
| 4KB Random Write | Up to 17,500 IOPS |
| Read Latency | 20µs |
| Write Latency | 20µs |
| MTBF | 2,000,000 hours |
| Power Consumption (Idle) | 4W |
| Power Consumption (Active) | <25W (Write) / <11W (Read) |
| Operating Temperature | 0°C ~ +55°C |
| Storage Temperature | -55°C ~ +95°C |
| Max Shock Resistance | 50G Trapezoidal, 170 in/s |
| Max Vibration Resistance | Operating: 2.17 GRMS (5-700Hz) Non-Operating: 3.13 GRMS (5-800Hz) |
| Height | Half Height Half Length (HHHL) |
| Weight | 185.00g |
| Shipping weight | 0.91 kg |
| Package size | 178 × 76 × 25 mm |
The interface provides roughly 4 GB/s of bandwidth while the drive delivers up to 460,000 IOPS at 4 KB, so the link can become the first bottleneck under heavy random read queues.
Active power stays below 25 W during writes and 11 W during reads; the drive is rated to operate continuously between 0 °C and 55 °C.
Yes, the HHHL form factor requires a compatible half-height slot, and the 25 W write power envelope assumes adequate chassis airflow to keep the drive within its 0–55 °C operating range.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?