KingSpec P3-512 512GB 2.5" SATA III internal SSD
- Internal Solid Stat…
- Consumer
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
KingSpec
A 512GB 2.5-inch SATA III solid-state drive using 3D NAND with sequential reads up to 560MB/s and writes up to 530MB/s
Options P3-512-Soccer
The KingSpec P3-512-FB is a 2.5 inch internal solid state drive with 512GB capacity. It uses 3D NAND flash and a SATA III 6Gbps interface. The drive is built for consumer laptops and desktops that need a direct storage upgrade.
Replacing a 2.5 inch HDD with this SSD removes the primary bottleneck in older systems. Sequential reads reach 560 MBps and writes reach 530 MBps. Random read performance hits 40000 IOPS and random write reaches 64000 IOPS. The jump is worth it when boot times, application loading and file transfers feel sluggish on spinning media.
The SATA 6Gbps link caps maximum throughput near 560 MBps regardless of NAND speed. The drive supports NCQ, TRIM, garbage collection, wear leveling and over-provisioning to sustain performance within that ceiling. Endurance is rated at 240 TBW with an MTBF of 1000000 hours. Idle power draw is 0.25W.
| Brand | KingSpec |
|---|---|
| Series | P3-FB Series |
| Model | P3-512-FB |
| Part Number | P3-512-FB |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | 2.5" |
| Capacity | 512GB |
| Memory Components | 3D NAND |
| Interface | SATA III |
| Protocol | SATA |
| Max Sequential Read | Up to 560 MBps |
| Max Sequential Write | Up to 530 MBps |
| 4KB Random Read | Up to 40,000 IOPS |
| 4KB Random Write | Up to 64,000 IOPS |
| Terabytes Written (TBW) | 240TB |
| MTBF | 1,000,000 hours |
| HeatSink | without HeatSink |
| Features | 1.SATA 6Gbps interface; 2. Support wear leveling; 3. Support Garbage collection; 4. Support Over-provisioning; 5. Support Native Command Queuing (NCQ); 6. Support TRIM; 7.Support S.M.A.R.T. ; |
| Power Consumption (Idle) | 0.25W |
| Power Consumption (Active) | 1.85W |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -20°C ~ +75°C |
| Operating Humidity | 5-95% |
| Height | 7.00mm |
| Width | 70.00mm |
| Depth | 100.4mm |
| Weight | 50g |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
The drive uses the standard 2.5" form factor and a SATA interface, so it fits any laptop or desktop bay designed for a 2.5" SATA drive.
Attach the SATA data cable to the motherboard SATA port and the drive, then connect the SATA power connector from the power supply; the common mistake is leaving the power cable unseated.
The drive is rated for 240 TBW, so replacement depends on how many terabytes you write; typical light workloads reach that figure after several years.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?