KingSpec P3-512 512GB 2.5" SATA III internal SSD
- Internal Solid Stat…
- Consumer
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
KingSpec
2.5 inch SATA III SSD with 2 TB capacity, up to 560 MB/s read and 530 MB/s write speeds, plus 960 TBW endurance
Options P3-2TB-Soccer
The KingSpec P3-FB is a 2TB internal solid-state drive built for consumer laptops and desktops. It uses 3D NAND flash and a SATA III 6Gbps interface to deliver sequential reads up to 560 MBps and writes up to 530 MBps. Random performance reaches 40,000 IOPS read and 64,000 IOPS write. The drive is rated for 960TB written and a 1,000,000-hour MTBF.
Verify that your device has a free 2.5-inch drive bay and a SATA data plus power connection. The drive works with SATA III, SATA II and SATA I ports, though speeds will match the port generation. Idle power draw is 0.25W, so confirm the system can supply that load. No heatsink is included, so ensure the bay has adequate airflow.
The firmware enables wear levelling, garbage collection, over-provisioning, NCQ, TRIM and S.M.A.R.T. monitoring. These functions maintain consistent write speeds, reduce cell wear and let the operating system reclaim unused blocks automatically. Together they extend the usable life of the 960TBW rating and keep performance steady under sustained workloads.
| Brand | KingSpec |
|---|---|
| Series | P3-FB Series |
| Model | P3-2TB-FB |
| Part Number | P3-2TB-FB |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | 2.5" |
| Capacity | 2TB |
| Memory Components | 3D NAND |
| Interface | SATA III |
| Protocol | SATA |
| Max Sequential Read | Up to 560 MBps |
| Max Sequential Write | Up to 530 MBps |
| 4KB Random Read | Up to 40,000 IOPS |
| 4KB Random Write | Up to 64,000 IOPS |
| Terabytes Written (TBW) | 960TB |
| MTBF | 1,000,000 hours |
| HeatSink | without HeatSink |
| Features | 1.SATA 6Gbps interface; 2. Support wear leveling; 3. Support Garbage collection; 4. Support Over-provisioning; 5. Support Native Command Queuing (NCQ); 6. Support TRIM; 7.Support S.M.A.R.T. ; |
| Power Consumption (Idle) | 0.25W |
| Power Consumption (Active) | 1.85W |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -20°C ~ +75°C |
| Operating Humidity | 5-95% |
| Height | 7.00mm |
| Width | 70.00mm |
| Depth | 100.4mm |
| Weight | 50g |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
The drive is supplied as a bare 2.5" SATA III unit; mounting brackets and data cables are not included and must be purchased separately if your system requires them.
Choose the capacity that matches your storage budget and workload — the 2 TB model delivers up to 560 MB/s read, 530 MB/s write, 40,000 random read IOPS, 64,000 random write IOPS and 960 TBW endurance.
It is the maximum sequential read rate over the SATA III link; real-world boot and load times will be lower but still far faster than a mechanical drive, with idle power draw of 0.25 W.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?