KingSpec P3-512 512GB 2.5" SATA III internal SSD
- Internal Solid Stat…
- Consumer
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
KingSpec
A 2.5" SATA III solid-state drive holding 8 TB of 3D NAND storage, delivering up to 550 MB/s reads and 510 MB/s writes with 3840 TBW endurance
Options P3-8TB
The KingSpec P3-8TB is a 2.5 inch internal solid state drive built for consumer laptops and desktops. It provides 8TB of storage using 3D NAND flash memory and connects through a standard SATA III interface.
The drive uses the common 2.5 inch form factor and SATA III connectors, so it fits most laptop bays and desktop drive cages without adapters. Its solid state design has no moving parts, giving it strong shock resistance for portable use. Supported features include TRIM, NCQ, S.M.A.R.T., wear leveling, garbage collection and over-provisioning to maintain consistent operation.
With an idle power consumption of 0.25W, the SSD adds minimal load to a system power budget and runs silently. Sequential reads reach up to 550 MBps and writes up to 510 MBps, while 4KB random performance hits 64,000 IOPS read and 40,000 IOPS write. The drive is rated for 3840 TBW and 1,000,000 hours MTBF.
| Brand | KingSpec |
|---|---|
| Series | P3 Series |
| Model | P3-8TB |
| Part Number | P3-8TB |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | 2.5" |
| Capacity | 8TB |
| Memory Components | 3D NAND |
| Interface | SATA III |
| Protocol | SATA |
| Max Sequential Read | Up to 550 MBps |
| Max Sequential Write | Up to 510 MBps |
| 4KB Random Read | Up to 64,000 IOPS |
| 4KB Random Write | Up to 40,000 IOPS |
| Terabytes Written (TBW) | 3840TB |
| MTBF | 1,000,000 hours |
| HeatSink | without HeatSink |
| Features | 1.SATA 6Gbps interface; 2. Support wear leveling; 3. Support Garbage collection; 4. Support Over-provisioning; 5. Support Native Command Queuing (NCQ); 6. Support TRIM; 7.Support S.M.A.R.T. ; |
| Power Consumption (Idle) | 0.25W |
| Power Consumption (Active) | 1.85W |
| Operating Temperature | 0°C ~ +75°C |
| Storage Temperature | -20°C ~ +75°C |
| Operating Humidity | 5-95% |
| Height | 7mm |
| Width | 70.0mm |
| Depth | 100.4mm |
| Weight | 50g |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
Yes. The drive uses the standard 2.5-inch form factor and a SATA III interface, so it fits any laptop or desktop bay designed for a 2.5-inch SATA drive.
The 3840 TBW rating means you could write roughly 3 TB every day for the three-year warranty period and still be within the rated endurance.
No heatsink is included or required; idle power draw is only 0.25 W, and the drive runs from the standard SATA power connector.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?