We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR5 RDIMM modules without heat spreaders

NEMIX RAM

NEMIX RAM 128GB 4x32GB DDR5 4800MHz ECC RDIMM Supermicro H13DSG-O-CPU

SKU CH-DRQG-RQKAW

128 GB DDR5-4800 ECC registered RDIMM kit, four 32 GB modules at 1.1 V CL40, validated for the Supermicro H13DSG-O-CPU motherboard

  • Capacity128GB (4 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 128GB 4X32GB

Show 30 more configurations
  • 128 GB total capacity from four 32 GB modules
  • DDR5 4800 MHz speed rated as PC5-38400
  • CL40 latency at 1.1 V operating voltage
  • ECC and registered design prevents data errors
  • 288-pin RDIMM form factor for Supermicro H13DSG-O-CPU

128GB DDR5 ECC RDIMM Kit

This NEMIX RAM kit delivers 128GB of DDR5 registered ECC memory across four 32GB modules. It operates at 4800MHz with CL40 latency at 1.10V. The 2Rx8 288-pin RDIMM form factor is built for the Supermicro H13DSG-O-CPU motherboard.

For Supermicro H13DSG-O-CPU servers

Suits administrators upgrading that specific Supermicro platform with a validated, fully populated memory configuration. Not for systems that require UDIMM or SODIMM modules, nor for boards that do not support registered ECC DDR5 at this speed and rank.

Kit of four matched modules

The package contains four 32GB RDIMMs pre-configured as a 128GB set. This eliminates the need to source individual sticks and ensures consistent rank, voltage, and timing across all populated slots for stable operation.

Highlights

  • 128 GB total capacity from four 32 GB modules
  • DDR5 4800 MHz speed rated as PC5-38400
  • CL40 latency at 1.1 V operating voltage
  • ECC and registered design prevents data errors
  • 288-pin RDIMM form factor for Supermicro H13DSG-O-CPU

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-328K4
Capacity128GB (4 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB 4X32GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Do I need a Supermicro H13DSG-O-CPU motherboard with 288-pin DDR5 RDIMM slots to use this 128GB kit?

Yes, this 4x32GB DDR5 4800MHz ECC Registered RDIMM kit is built for the Supermicro H13DSG-O-CPU motherboard and requires its 288-pin registered DIMM slots.

Will these 2Rx8 CL40 modules run at DDR5 4800 if I populate all four slots alongside any existing RDIMMs?

The kit is spec-matched to the board's memory-population rules; mixing ranks or speeds can downclock the bus, so the manual should be checked for approved DIMM order before adding other modules.

How can I confirm the 128GB kit is running at PC5-38400 with ECC active after installation?

Enter the BIOS or use a tool like dmidecode to verify each 32GB module shows DDR5 4800, CL40, 1.1V, 2Rx8 registered and that ECC is reported as enabled.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.