We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM 128GB (2x64GB) DDR5 5600 CL46 1.1V 2Rx4 ECC Registered RDIMM memory upgrade for Supermicro H14DSG-OM

SKU CH-8ZBY-JNJP7

128GB DDR5 5600 CL46 1.1V ECC registered RDIMM kit for Supermicro H14DSG-OM

  • Capacity128GB (2 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 128GB 2X64GB

Show 30 more configurations
  • 128 GB total capacity from two 64 GB modules
  • DDR5 5600 speed with CL46 latency at 1.10 V
  • Registered ECC RDIMM for server-grade stability
  • 2Rx4 dual-rank organisation for full-population support
  • Exact-match kit verified for Supermicro H14DSG-OM

128GB DDR5-5600 Registered ECC Kit

This 128GB kit contains two 64GB DDR5 RDIMMs rated at 5600 MT/s with CL46 latency and 1.1V operation. The modules use a 2Rx4 registered ECC design built with major OEM DRAM chips for server-grade stability. They are specified as an exact-match upgrade for the Supermicro H14DSG-OM motherboard.

Suited for Supermicro H14DSG-OM population

This kit fits administrators expanding a Supermicro H14DSG-OM with registered ECC memory that matches the board's required rank, voltage and timing. Builders using consumer UDIMMs, non-ECC modules or different DDR generations should look elsewhere because those will not be recognised or will not function in this platform.

Straightforward 288-pin RDIMM installation

The 288-pin RDIMMs install like standard server DIMMs; follow the motherboard manual for the approved population order and seating procedure. The most common issue is mixing registered and unbuffered modules or skipping the manual's slot sequence, which prevents the system from posting at the rated 5600 speed.

Highlights

  • 128 GB total capacity from two 64 GB modules
  • DDR5 5600 speed with CL46 latency at 1.10 V
  • Registered ECC RDIMM for server-grade stability
  • 2Rx4 dual-rank organisation for full-population support
  • Exact-match kit verified for Supermicro H14DSG-OM

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-924K2
Capacity128GB (2 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB 2X64GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What motherboard must I already own for this 288-pin DDR5 RDIMM kit to be recognised?

The kit is validated for the Supermicro H14DSG-OM motherboard; its memory controller expects the exact 2Rx4 registered ECC layout at 1.10 V.

Can I mix these 5600 CL46 modules with slower DDR5 RDIMMs already installed in the server?

The board will down-clock all populated slots to the slowest module's speed and loosest timings, so the 128 GB kit will run at the lower frequency.

How do I confirm the full 128 GB is active and ECC is functioning after installation?

Enter the BIOS or run a hardware inventory tool — it should report 128 GB at DDR5-5600 with ECC enabled and no correctable error alerts.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.