We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green bare DDR5 RDIMM module with black chips and gold contacts

NEMIX RAM

NEMIX RAM 16GB DDR5 5600MHz PC5-44800 1Rx8 CL46 ECC Registered RDIMM Supermicro H13SSW memory upgrade

SKU CH-RK1Z-M9V75

16 GB DDR5 5600 MHz ECC registered RDIMM validated for Supermicro H13SSW servers

  • Capacity16GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 16GB

Show 24 more configurations
  • Exact DDR5-5600 match for Supermicro H13SSW
  • 1Rx8 registered ECC prevents silent data errors
  • 1 V operation reduces server power draw
  • 288-pin RDIMM fits board population rules
  • Major OEM chips ensure enterprise reliability

System-Specific DDR5 ECC RDIMM Upgrade

This NEMIX RAM module is a 16GB DDR5 5600MHz PC5-44800 Registered ECC RDIMM built for the Supermicro H13SSW motherboard. It runs at 1.10V with CL46 latency in a 1Rx8 configuration using 288-pin DDR5 form factor. The exact rank, voltage and timing match the board's memory controller requirements for full-capacity recognition at rated speed.

Suited For Supermicro H13SSW Servers

This part suits administrators upgrading a Supermicro H13SSW system that requires Registered ECC DDR5 RDIMMs with 1Rx8 organisation. Builders needing unbuffered UDIMMs, SODIMM form factors, non-ECC memory or different rank configurations should look elsewhere because this module will not function in those slots.

Registered ECC Architecture Decides Fit

The single specification that determines compatibility is the Registered ECC RDIMM architecture combined with 1Rx8 rank organisation. The Supermicro H13SSW memory controller expects buffered registered modules with on-die ECC; unbuffered or non-ECC DIMMs will not be recognised or will cause boot failures.

Highlights

  • Exact DDR5-5600 match for Supermicro H13SSW
  • 1Rx8 registered ECC prevents silent data errors
  • 1 V operation reduces server power draw
  • 288-pin RDIMM fits board population rules
  • Major OEM chips ensure enterprise reliability

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-618K1
Capacity16GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does this 288-pin DDR5 RDIMM require a motherboard that supports registered ECC memory?

Yes, the module is a registered ECC RDIMM built for DDR5 5600 (PC5-44800) at 1.1V with CL46 timing, so the motherboard must support registered DDR5 ECC DIMMs.

Can I mix this 1Rx8 registered ECC module with older unbuffered DDR5 UDIMMs in the same Supermicro H13SSW system?

No, the H13SSW requires registered RDIMMs; mixing registered and unbuffered DIMMs is not supported and will prevent the system from posting.

How can I confirm the kit is running at the rated 5600 MT/s after installation?

Enter the BIOS or use a hardware information utility and verify the memory speed shows DDR5-5600 (PC5-44800) with CL46 latency at 1.1V.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.