We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green 288-pin DDR5 RDIMM modules with black chips no heat spreader

NEMIX RAM

NEMIX RAM 192GB 2x96GB DDR5 5600 CL46 2Rx4 ECC RDIMM Supermicro H13SSW memory upgrade

SKU CH-NHBV-NV2F1

192 GB DDR5-5600 2Rx4 registered ECC RDIMM kit validated for Supermicro H13SSW servers

  • Capacity192GB (2 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 192GB 2X96GB

Show 24 more configurations
  • 192 GB total capacity from two 96 GB modules
  • DDR5 5600 speed with CL46 latency for rated throughput
  • Registered ECC design corrects single-bit errors automatically
  • 1 V operation matches Supermicro H13SSW memory controller spec
  • 288-pin RDIMM form factor fits the board's DIMM slots exactly

Exact-match DDR5 RDIMM kit for Supermicro H13SSW

This 192 GB kit contains two 96 GB DDR5 5600 modules built to the precise rank, voltage and timing the board expects. Registered ECC architecture ensures the memory controller recognises full capacity and runs at rated speed. It is intended for administrators upgrading a compatible Supermicro server.

288-pin registered form factor with ECC

The modules use the 288-pin RDIMM form factor required by the H13SSW, not UDIMM or SODIMM. Registered buffering offloads the memory controller so every populated slot operates at full capacity. On-board ECC corrects single-bit errors on the fly to prevent silent data corruption.

1.1 V operation at CL46 without heat spreaders

Running at 1.10 V and CL46, the kit draws minimal power while maintaining stability under continuous load. The absence of heat spreaders relies on server chassis airflow for cooling, keeping acoustic output low in dense rack environments. Enterprise validation targets uninterrupted production uptime.

Highlights

  • 192 GB total capacity from two 96 GB modules
  • DDR5 5600 speed with CL46 latency for rated throughput
  • Registered ECC design corrects single-bit errors automatically
  • 1 V operation matches Supermicro H13SSW memory controller spec
  • 288-pin RDIMM form factor fits the board's DIMM slots exactly

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K2
Capacity192GB (2 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 2X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What does the DDR5 5600 (PC5-44800) interface cap the memory speed at?

The modules run at 5600 MT/s with a PC5-44800 bandwidth rating, matching the Supermicro H13SSW memory controller's rated speed.

What physical slot and form factor do these 96GB modules need?

They are 288-pin RDIMMs requiring DDR5 RDIMM slots; the board will not accept UDIMM or SODIMM modules.

How do I install the 2Rx4 kit in the Supermicro H13SSW, and what step is often missed?

Follow the motherboard manual's DIMM population order exactly; a common error is populating slots in the wrong sequence for dual-channel operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.