We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM 192GB (4 x 48GB) DDR5 5600 ECC RDIMM CL46 1.1V Supermicro H13SSW memory upgrade

SKU CH-97PE-NPC4X

192 GB DDR5 5600 ECC registered RDIMM kit validated for Supermicro H13SSW motherboards

  • Capacity192GB (4 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 192GB 4X48GB

Show 24 more configurations
  • 192 GB total capacity in a matched 4 x 48 GB kit
  • DDR5 5600 speed with CL46 latency for rated throughput
  • Registered ECC design corrects single-bit errors and stabilises full population
  • 1 V operation matches the Supermicro H13SSW memory controller spec
  • 288-pin RDIMM form factor fits the required server motherboard slots

Exact-fit DDR5-5600 kit for Supermicro H13SSW

This NEMIX RAM kit delivers 192 GB across four 48 GB DDR5 RDIMMs rated at 5600 MT/s with CL46 timing and 1.10 V operation. Registered ECC architecture with 2Rx8 organisation provides the error correction and signal buffering that multi-socket server workloads require.

Check your platform configuration

Verify the Supermicro H13SSW manual for maximum supported capacity per slot, approved population sequence for four RDIMMs, and any BIOS revision needed to recognise the full 192 GB at rated speed. The board requires 288-pin registered modules; UDIMM or SODIMM variants will not seat or function.

Thermals and power in normal use

Bare modules without heat spreaders rely on chassis airflow; ensure front-to-rear cooling meets the server vendor's airflow specification. Registered buffering and 1.10 V DDR5 voltage keep per-module power modest, but total draw scales with all four slots populated under sustained load.

Highlights

  • 192 GB total capacity in a matched 4 x 48 GB kit
  • DDR5 5600 speed with CL46 latency for rated throughput
  • Registered ECC design corrects single-bit errors and stabilises full population
  • 1 V operation matches the Supermicro H13SSW memory controller spec
  • 288-pin RDIMM form factor fits the required server motherboard slots

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-4828K4
Capacity192GB (4 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 4X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the kit include four 48GB DDR5 5600 RDIMM modules or must I buy extra sticks?

The package contains four 48GB DDR5 5600 PC5-44800 2Rx8 CL46 1.1V 288-pin ECC registered RDIMM modules, giving 192GB total.

Should I pick this 192GB four-module kit or a smaller capacity for the Supermicro H13SSW?

Choose the 192GB 4 x 48GB kit when your board's population rules allow four 2Rx8 RDIMMs at DDR5 5600; smaller kits use fewer modules of the same spec.

Will the CL46 1.1V timing run at DDR5 5600 on the H13SSW without manual BIOS changes?

The kit is spec-matched to the H13SSW memory controller, so the 2Rx8 registered ECC modules are recognised at full 5600 MT/s with CL46 at 1.1V.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.