We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 RDIMM modules without heat spreaders in a 32GB kit

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR5 5600 CL46 ECC RDIMM Supermicro H14SSL-N

SKU CH-2FKS-1TKMP

A 32 GB DDR5-5600 ECC registered dual-rank kit built for the Supermicro H14SSL-N motherboard

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 32GB 2X16GB

Show 24 more configurations
  • 32 GB total capacity from two 16 GB modules for high-density server workloads
  • DDR5 5600 speed rated at PC5-44800 for fast data throughput
  • ECC registered design detects and corrects single-bit errors to protect data integrity
  • 1 V operation at CL46 latency matches the motherboard's memory controller specification
  • 288-pin RDIMM form factor verified for Supermicro H14SSL-N motherboard compatibility

32GB DDR5 ECC RDIMM kit for Supermicro H14SSL-N

This 32GB kit contains two 16GB DDR5 5600 registered ECC modules built for the Supermicro H14SSL-N motherboard. It targets administrators who need exact-match memory that the board recognises at full capacity and rated speed.

Registered 288-pin form factor with no heat spreader

Registered architecture buffers the memory controller so every slot runs fully populated, while ECC corrects single-bit errors on the fly. The plain 288-pin RDIMM design fits the board's required slots without interference from a spreader.

DDR5 5600 CL46 at 1.1V with 1Rx8 organisation

The modules run at DDR5 5600 (PC5-44800) with CAS latency 46, 1.1V voltage and single-rank x8 layout. These precise timing, voltage and rank parameters decide whether the kit operates at its rated specification on the H14SSL-N platform.

Highlights

  • 32 GB total capacity from two 16 GB modules for high-density server workloads
  • DDR5 5600 speed rated at PC5-44800 for fast data throughput
  • ECC registered design detects and corrects single-bit errors to protect data integrity
  • 1 V operation at CL46 latency matches the motherboard's memory controller specification
  • 288-pin RDIMM form factor verified for Supermicro H14SSL-N motherboard compatibility

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-618K2
Capacity32GB (2 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content32GB 2X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What speed and latency does this DDR5 kit run at?

The kit operates at DDR5 5600 with CL46 latency, matching the Supermicro H14SSL-N memory controller specifications for full rated performance.

What physical slot and form factor does this memory require?

It uses a 288-pin DDR5 RDIMM form factor; the motherboard requires registered DIMMs, not UDIMM or SODIMM modules.

How should the two modules be installed on the Supermicro H14SSL-N?

Install both 16 GB modules following the board's approved DIMM population order in the manual; incorrect slot order is the most common setup error.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.