We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 384GB 4x96GB DDR5 5600 CL46 1.1V ECC RDIMM Supermicro H14SHM memory upgrade

SKU CH-BNHG-VDVBN

384 GB DDR5-5600 ECC registered kit with four 96 GB modules at CL46 and 1.1 V for Supermicro H14SHM

  • Capacity384GB (4 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 384 GB total capacity from four 96 GB modules
  • DDR5 5600 speed with CL46 latency at 1.1 V
  • Registered ECC design prevents data errors under full load
  • 288-pin RDIMM form factor matches Supermicro H14SHM slots
  • Built with major-brand Samsung, Micron or Hynix DRAM chips

Exact DDR5-5600 kit for Supermicro H14SHM

This NEMIX RAM kit delivers 384GB across four 96GB DDR5-5600 registered ECC RDIMMs. Each module runs at 1.1V with CL46 timing and a 2Rx4 organisation. The registered design lets the Supermicro H14SHM memory controller address every slot at full capacity without signal degradation.

Check manual for population rules

Before ordering, consult the Supermicro H14SHM manual for approved DIMM population order and maximum supported capacity per channel. The board requires 288-pin RDIMMs; UDIMM or SODIMM modules will not fit or function. Verify that your BIOS revision recognises 96GB dual-rank modules at the rated speed.

Registered ECC frees the controller for full-slot

The registered architecture buffers address and command signals, reducing electrical load on the motherboard so all four slots can run populated at 5600 MT/s. On-die ECC corrects single-bit errors in flight, preventing silent data corruption that would otherwise crash services or corrupt datasets. No heat spreader is fitted, so ensure chassis airflow meets the server vendor's thermal guidelines.

Highlights

  • 384 GB total capacity from four 96 GB modules
  • DDR5 5600 speed with CL46 latency at 1.1 V
  • Registered ECC design prevents data errors under full load
  • 288-pin RDIMM form factor matches Supermicro H14SHM slots
  • Built with major-brand Samsung, Micron or Hynix DRAM chips

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K4
Capacity384GB (4 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content384GB 4X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What comes in the box and do I need anything else to install it?

The kit includes four 96GB DDR5-5600 ECC registered RDIMMs for a total of 384GB. No extra parts are required; the modules plug directly into the 288-pin slots on the Supermicro H14SHM motherboard.

Should I choose this 4x96GB kit or a different capacity for the H14SHM?

This 384GB kit matches the board's DDR5-5600, 1.1V, CL46, 2Rx4 registered specification exactly. Select it when you need the full 384GB capacity across four slots.

What does the DDR5-5600 CL46 rating mean once the memory is running in the server?

The modules will operate at 5600 MT/s with a CAS latency of 46 cycles at 1.1V, delivering the rated bandwidth and error-correcting stability the H14SHM memory controller expects when all four slots are populated.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.