NEMIX RAM 576GB 6x96GB DDR5 4800 CL40 2Rx4 1.1V ECC RDIMM Supermicro H14DSG-O-CPU memory upgrade
- 576GB (6 x 96GB)
- 288-Pin DDR5 RDIMM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
NEMIX RAM
512 GB DDR5 5600 ECC Registered RDIMM kit (4 × 128 GB, CL46, 1.1 V) validated for Supermicro H14DSH motherboards
Size 512GB 4X128GB
Struck-through versions exist but are not stocked here.
Speed 5600MHz
This 512GB kit contains four 128GB DDR5 5600 RDIMM modules built to the exact rank, voltage and timing the Supermicro H14DSH memory controller expects. Registered ECC architecture allows every slot to run fully populated at rated speed while correcting single-bit errors on the fly. The 288-pin form factor matches the board's physical requirements.
Four dual-rank modules deliver 512GB total, providing headroom for large virtualisation clusters, in-memory databases and high-thread-count compute workloads. The 2Rx4 layout keeps electrical load manageable across all channels, though the registered buffer adds one cycle of latency compared with unbuffered alternatives. Maximum capacity is defined by the motherboard's supported population rules.
The DDR5 5600 (PC5-44800) interface operates at 1.1V with CL46 timing, setting the bandwidth and latency ceiling for this platform. Registered signalling reduces electrical stress on the memory controller but does not increase the peak data rate beyond the JEDEC 5600 MT/s specification. Systems requiring higher throughput or lower latency must use a platform that supports faster DDR5 speeds.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-724K4 |
| Capacity | 512GB (4 x 128GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 512GB 4X128GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
The kit is spec-matched to the H14DSH memory controller at DDR5-5600 CL46 1.1 V. Mixing ranks or speeds can force the board to down-clock; populate all slots with identical 2Rx4 RDIMMs for full rated performance.
Enter the BIOS or UEFI and confirm the memory frequency shows 5600 MT/s, total capacity reads 512 GB, and ECC status reports enabled for each channel.
The package content lists only the 512 GB 4×128 GB DDR5-5600 CL46 288-pin ECC registered RDIMM kit; no additional brackets, cables or tools are supplied.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?