暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

NEMIX RAM

NEMIX RAM 512GB 4x128GB DDR5 5600 CL46 ECC Registered RDIMM Supermicro H14DSH

SKU CH-TFZJ-C57T7

512 GB DDR5 5600 ECC Registered RDIMM kit (4 × 128 GB, CL46, 1.1 V) validated for Supermicro H14DSH motherboards

  • Capacity512GB (4 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Speed 5600MHz

  • 512 GB total capacity from four 128 GB modules
  • DDR5 5600 speed with CL46 latency for rated throughput
  • Registered ECC design corrects single-bit errors automatically
  • 1 V operation matches the motherboard specification exactly
  • 288-pin RDIMM form factor fits the Supermicro H14DSH slots

Server Memory Kit for Supermicro H14DSH

This 512GB kit contains four 128GB DDR5 5600 RDIMM modules built to the exact rank, voltage and timing the Supermicro H14DSH memory controller expects. Registered ECC architecture allows every slot to run fully populated at rated speed while correcting single-bit errors on the fly. The 288-pin form factor matches the board's physical requirements.

512GB Capacity with 2Rx4 Organisation

Four dual-rank modules deliver 512GB total, providing headroom for large virtualisation clusters, in-memory databases and high-thread-count compute workloads. The 2Rx4 layout keeps electrical load manageable across all channels, though the registered buffer adds one cycle of latency compared with unbuffered alternatives. Maximum capacity is defined by the motherboard's supported population rules.

DDR5 5600 Registered ECC Interface Limits

The DDR5 5600 (PC5-44800) interface operates at 1.1V with CL46 timing, setting the bandwidth and latency ceiling for this platform. Registered signalling reduces electrical stress on the memory controller but does not increase the peak data rate beyond the JEDEC 5600 MT/s specification. Systems requiring higher throughput or lower latency must use a platform that supports faster DDR5 speeds.

特長

  • 512 GB total capacity from four 128 GB modules
  • DDR5 5600 speed with CL46 latency for rated throughput
  • Registered ECC design corrects single-bit errors automatically
  • 1 V operation matches the motherboard specification exactly
  • 288-pin RDIMM form factor fits the Supermicro H14DSH slots

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-724K4
Capacity512GB (4 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content512GB 4X128GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will the 2Rx4 registered DDR5 modules run at 5600 MHz alongside any existing RDIMMs I keep in the Supermicro H14DSH?

The kit is spec-matched to the H14DSH memory controller at DDR5-5600 CL46 1.1 V. Mixing ranks or speeds can force the board to down-clock; populate all slots with identical 2Rx4 RDIMMs for full rated performance.

How can I verify the 512 GB kit is detected at full speed and ECC is active after installation?

Enter the BIOS or UEFI and confirm the memory frequency shows 5600 MT/s, total capacity reads 512 GB, and ECC status reports enabled for each channel.

Does the box contain only the four 128 GB RDIMMs or are any brackets, cables or tools included?

The package content lists only the 512 GB 4×128 GB DDR5-5600 CL46 288-pin ECC registered RDIMM kit; no additional brackets, cables or tools are supplied.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。