We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 64GB 4x16GB DDR5 5600 ECC Registered RDIMM CL46 1.1V Supermicro H13SSW

SKU CH-EQ7V-TNJ1R

A 64 GB kit of four 16 GB DDR5-5600 registered ECC RDIMMs at 1.1 V CL46, validated for the Supermicro H13SSW motherboard

  • Capacity64GB (4 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 64 GB capacity from four 16 GB modules for full server utilisation
  • DDR5 5600 speed with CL46 latency delivers rated throughput
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
  • 1 V operation matches the Supermicro H13SSW memory controller specification
  • 288-pin RDIMM form factor fits the board's required slot type

Exact-match DDR5-5600 kit for Supermicro H13SSW

This 64 GB kit contains four 16 GB DDR5-5600 registered ECC RDIMMs built to the precise rank, voltage and timing the Supermicro H13SSW memory controller expects. The modules are 1Rx8, run at 1.1 V with CL46 latency and use the 288-pin RDIMM form factor required by this server board.

Verify motherboard population rules before ordering

Server memory support varies by model and BIOS revision. Consult the Supermicro H13SSW manual for supported capacities, approved DIMM population order and installation steps to ensure the kit is recognised at full capacity and rated speed.

Registered ECC design runs cool

The registered architecture offloads the memory controller so every slot operates fully populated while ECC corrects single-bit errors on the fly. Low 1.1 V operation and the absence of a heat spreader keep thermals and power draw modest in normal server workloads.

Highlights

  • 64 GB capacity from four 16 GB modules for full server utilisation
  • DDR5 5600 speed with CL46 latency delivers rated throughput
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
  • 1 V operation matches the Supermicro H13SSW memory controller specification
  • 288-pin RDIMM form factor fits the board's required slot type

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-618K4
Capacity64GB (4 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB 4X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What comes in the 64GB kit and do I need anything else to install it?

The kit contains four 16GB DDR5 5600 CL46 1.10V 288-pin ECC Registered RDIMMs. No extra parts are required; install them into the Supermicro H13SSW DIMM slots following the board's population order.

Should I choose the 4x16GB kit or a different capacity for the H13SSW?

This 4x16GB kit provides 64GB total and matches the H13SSW's Registered RDIMM requirement. Choose it when your workload needs that capacity and the board's manual confirms four-module population.

What does DDR5 5600 (PC5-44800) CL46 mean once the modules are running in the server?

The modules operate at 5600 MT/s with a CAS latency of 46 cycles at 1.10V. The Registered design and ECC let all four slots run fully populated at that rated speed while correcting single-bit errors.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.