We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green 288-pin DDR5 RDIMM modules, bare chips, no heat spreaders

NEMIX RAM

NEMIX RAM DDR5 4800 ECC RDIMM 128GB (2x64GB) CL40 1.1V Supermicro H13SSF memory upgrade

SKU CH-CQR7-JZWRQ

128 GB DDR5 ECC registered DIMM kit (2×64 GB) at 4800 MHz CL40 1.1 V for Supermicro H13SSF

  • Capacity128GB (2 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 128GB 2X64GB

Show 30 more configurations
  • 128 GB total capacity from a matched 2 × 64 GB kit
  • DDR5-4800 speed with CL40 timing for rated server performance
  • Registered ECC RDIMM architecture corrects single-bit errors on the fly
  • 1 V operation at 2Rx4 rank matches the board's memory controller spec
  • Verified fit for Supermicro H13SSF with 288-pin RDIMM form factor

Capacity and platform match

This NEMIX RAM kit provides 128 GB of DDR5 memory in a matched pair of 64 GB modules. It is built as an exact-fit upgrade for the Supermicro H13SSF motherboard, using the 288-pin Registered DIMM form factor that board requires.

Who this suits and who should look elsewhere

Server administrators expanding a Supermicro H13SSF system to its full memory capacity will find the correct rank, voltage and timing in one package. Builders who need unbuffered UDIMMs, SODIMMs or a different DDR generation cannot use this kit.

What to verify before ordering

Confirm the motherboard manual for approved DIMM population order and maximum supported capacity per slot. Ensure the system BIOS is updated to a version that recognises DDR5-4800 Registered ECC modules at 1.1 V.

Highlights

  • 128 GB total capacity from a matched 2 × 64 GB kit
  • DDR5-4800 speed with CL40 timing for rated server performance
  • Registered ECC RDIMM architecture corrects single-bit errors on the fly
  • 1 V operation at 2Rx4 rank matches the board's memory controller spec
  • Verified fit for Supermicro H13SSF with 288-pin RDIMM form factor

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-924K2
Capacity128GB (2 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB 2X64GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What motherboard must I already own for this 128GB DDR5 4800 kit to work?

The kit is validated for the Supermicro H13SSF motherboard, which uses the 288-pin DDR5 RDIMM form factor this memory provides.

How will these registered ECC modules behave if I keep older RDIMMs of different rank or speed installed?

Registered architecture offloads the memory controller, but mixing ranks or speeds can prevent full-capacity operation; populate slots per the H13SSF manual for stable 4800 MT/s performance.

How do I verify the system sees both 64GB modules at CL40 after installation?

Check the BIOS memory info or OS tool such as dmidecode: it should report 128GB total, DDR5-4800, CL40, 1.1V, 2Rx4 registered ECC on each DIMM.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.