We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Eight green DDR5 RDIMM sticks in anti-static tray

NEMIX RAM

NEMIX RAM DDR5 5600 128GB 8x16GB CL46 1.1V ECC Registered RDIMM memory upgrade

SKU CH-DKBX-5BFXE

Eight 16 GB DDR5 registered ECC RDIMMs running at 5600 MHz with CL46 timing and 1.1 V for Supermicro H13SST-G servers

  • Capacity128GB (8 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 128GB 8X16GB

Show 24 more configurations
  • 128 GB kit fills every slot at rated speed
  • 5600 MT/s DDR5 bandwidth for data-intensive workloads
  • Registered ECC design prevents silent data corruption
  • 1 V operation lowers server power draw
  • 8 × 16 GB 1Rx8 modules match Supermicro H13SST-G population rules

NEMIX RAM DDR5 5600 128GB kit

This 128GB kit contains eight 16GB DDR5 5600 Registered ECC RDIMMs. It is built for servers and workstations that require error-correcting registered memory to maintain data integrity under continuous load. The modules operate at 1.1V with a CAS latency of CL46.

Supermicro H13SST-G verified fitment

The 288-pin RDIMM form factor matches the slots on the Supermicro H13SST-G motherboard. Registered architecture buffers the address and command signals so the memory controller can drive a fully populated configuration at the rated DDR5 5600 speed. Population rules and maximum supported capacity are defined by the board firmware.

Eight-module 128GB capacity ceiling

Eight 1Rx8 modules fill every available slot on compatible boards, delivering the full 128GB at the rated PC5-44800 data rate. Expanding beyond this total requires a motherboard with additional memory channels or higher-density DIMMs that the current platform may not support.

Highlights

  • 128 GB kit fills every slot at rated speed
  • 5600 MT/s DDR5 bandwidth for data-intensive workloads
  • Registered ECC design prevents silent data corruption
  • 1 V operation lowers server power draw
  • 8 × 16 GB 1Rx8 modules match Supermicro H13SST-G population rules

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-618K8
Capacity128GB (8 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB 8X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Should I pick the 8-module 128 GB kit or a smaller capacity for my Supermicro H13SST-G?

The 8 x 16 GB kit fills all eight slots on the H13SST-G and gives the full 128 GB the board supports; smaller kits leave slots empty and reduce total capacity.

What does the DDR5-5600 CL46 rating deliver once the modules are installed in the server?

The memory controller will run the kit at 5600 MT/s with a CAS latency of 46 cycles at 1.1 V, providing the rated throughput and timing the board expects.

How does the 288-pin RDIMM registered ECC interface affect real-world operation?

Registered buffering lets all eight slots run fully populated at 5600 MT/s while ECC corrects single-bit errors on the fly, preventing silent data corruption.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.