We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 RDIMM sticks, black chips, no heat spreaders, 288-pin edge connectors

NEMIX RAM

NEMIX RAM DDR5 5600 256GB (2x128GB) CL46 1.1V 2Rx4 ECC Registered RDIMM Supermicro H13SST-G memory upgrade

SKU CH-5S5S-6YGSM

256 GB kit of two 128 GB DDR5 5600 CL46 1.1 V ECC registered RDIMMs validated for Supermicro H13SST-G

  • Capacity256GB (2 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 256GB 2X128GB

Show 24 more configurations
  • 256 GB total capacity with two 128 GB modules
  • DDR5-5600 speed rated at PC5-44800 for server workloads
  • Registered ECC design corrects single-bit errors on the fly
  • 2Rx4 dual-rank organisation matches Supermicro H13SST-G memory rules
  • 1 V operation at CL46 timing validated for this platform

Supermicro H13SST-G DDR5 RDIMM kit

This 256GB kit contains two 128GB DDR5-5600 Registered ECC RDIMMs built for the Supermicro H13SST-G motherboard. The modules run at PC5-44800 with CL46 latency at 1.1V. The 2Rx4 rank layout and 288-pin form factor match the board's memory-controller requirements exactly.

Not for UDIMM or non-ECC platforms

Systems that require unbuffered UDIMMs, SODIMMs or non-ECC memory cannot use this registered kit. Buyers needing lower capacities, different speeds or consumer desktop memory should look at other options.

2Rx4 registered ECC at DDR5-5600

The 2Rx4 registered ECC organisation at DDR5-5600 CL46 1.1V is the single spec that decides compatibility; the board must support this exact rank, voltage and timing for full-capacity operation.

Highlights

  • 256 GB total capacity with two 128 GB modules
  • DDR5-5600 speed rated at PC5-44800 for server workloads
  • Registered ECC design corrects single-bit errors on the fly
  • 2Rx4 dual-rank organisation matches Supermicro H13SST-G memory rules
  • 1 V operation at CL46 timing validated for this platform

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-724K2
Capacity256GB (2 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 2X128GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does this kit require the Supermicro H13SST-G motherboard to have 288-pin RDIMM slots for installation?

Yes, the 288-pin Registered RDIMM form factor matches the slots on the Supermicro H13SST-G motherboard; UDIMM or SODIMM modules will not fit.

Can I keep my existing DDR5 4800 modules installed alongside this DDR5 5600 kit?

Mixing speeds forces all modules to run at the lower 4800 rate; for full DDR5 5600 performance the board should be populated only with this CL46 1.1V kit.

How can I confirm the system is running the full 256 GB at DDR5 5600 CL46 after installation?

Check the BIOS memory information or OS tools such as dmidecode — they should report 256 GB total, 5600 MT/s data rate and CL46 timings.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.