We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM DDR5 5600 576GB (6x96GB) CL46 2Rx4 ECC RDIMM Supermicro H13SSW memory upgrade

SKU CH-3370-VPTVW

A 576GB DDR5 server memory kit of six 96GB registered ECC RDIMMs at 5600MHz CL46 1.1V, validated for Supermicro H13SSW motherboards

  • Capacity576GB (6 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 576 GB total capacity from six 96 GB modules for large memory workloads
  • DDR5 5600 speed (PC5-44800) matches the board's rated data rate
  • CL46 CAS latency and 1.1 V voltage meet the controller's exact timing spec
  • 2Rx4 Registered ECC RDIMM design enables full-slot population with error correction
  • Verified compatibility with Supermicro H13SSW motherboard 288-pin RDIMM slots

Supermicro H13SSW memory upgrade

This 576GB kit contains six 96GB DDR5 RDIMM modules built to the exact specification required by the Supermicro H13SSW motherboard. It targets administrators who need to maximise registered ECC capacity on that platform.

Sustained-load behaviour

Registered buffering reduces electrical load on the memory controller, allowing all six slots to remain fully populated at the rated 5600 MT/s without downclocking. ECC detects and corrects single-bit errors continuously, preventing silent data corruption during long-running workloads.

DDR5 interface limits

The PC5-44800 standard defines a 5600 MT/s transfer rate at 1.1V with CL46 latency. Bandwidth and rank density are bounded by this specification, so total throughput cannot exceed the controller's native DDR5-5600 ceiling.

Highlights

  • 576 GB total capacity from six 96 GB modules for large memory workloads
  • DDR5 5600 speed (PC5-44800) matches the board's rated data rate
  • CL46 CAS latency and 1.1 V voltage meet the controller's exact timing spec
  • 2Rx4 Registered ECC RDIMM design enables full-slot population with error correction
  • Verified compatibility with Supermicro H13SSW motherboard 288-pin RDIMM slots

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K6
Capacity576GB (6 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content576GB 6X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How much power does the 576GB DDR5 5600 kit draw at 1.1V when all six modules run continuously?

Each 96GB module operates at 1.1V, so the full 576GB kit runs at the standard DDR5 1.1V supply; total system power depends on the Supermicro H13SSW memory controller and workload.

What motherboard slot type and population rules must the Supermicro H13SSW already support for this 6x96GB RDIMM kit?

The board needs six 288-pin DDR5 RDIMM slots and must allow 2Rx4 registered ECC DIMMs per its qualified vendor list; consult the H13SSW manual for the exact population order.

Will these CL46 2Rx4 registered ECC modules work alongside any existing DDR5 RDIMMs I keep in the H13SSW?

Mixing is only reliable when every installed DIMM matches the same 5600MT/s speed, 1.1V voltage, 2Rx4 rank, registered ECC type and the board's approved population sequence.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.