We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM DDR5 ECC RDIMM 32GB (2×16GB) 4800MHz CL40 1.1V 1Rx8 Registered Supermicro H13SSH-E memory upgrade

SKU CH-W2Q6-VHBDR

A 32 GB dual-module DDR5-4800 registered ECC kit built to the Supermicro H13SSH-E's exact rank, voltage and timing requirements

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • 32 GB dual-rank kit enables full-capacity server operation
  • DDR5-4800 CL40 at 1.10 V matches board timing specs
  • Registered ECC design corrects single-bit errors automatically
  • 288-pin RDIMM form factor fits Supermicro H13SSH-E slots
  • Major OEM Samsung Micron Hynix chips ensure enterprise-grade reliability

Exact-match DDR5-4800 RDIMM kit

This 32 GB kit (2 × 16 GB) delivers DDR5-4800 (PC5-38400) registered ECC memory at 1.10 V and CL40. It is built for the Supermicro H13SSH-E motherboard and uses 1Rx8 Samsung, Micron or Hynix chips. The registered architecture lets every slot run fully populated at rated speed while ECC corrects single-bit errors on the fly.

Straightforward 288-pin installation

The modules are standard 288-pin RDIMMs that seat in the board's DDR5 DIMM slots. No heat spreaders are fitted, so clearance is minimal. Follow the motherboard manual for the approved population order; incorrect slot filling or mixing ranks will prevent the system from posting at full capacity.

32 GB registered ECC capacity

Two 16 GB ranks give 32 GB of error-correcting memory for virtualization, databases or compute workloads. The registered buffer offloads the controller so all slots operate at 4800 MT/s. Workloads that need more than 32 GB per channel or unbuffered UDIMM modules are not supported by this kit.

Highlights

  • 32 GB dual-rank kit enables full-capacity server operation
  • DDR5-4800 CL40 at 1.10 V matches board timing specs
  • Registered ECC design corrects single-bit errors automatically
  • 288-pin RDIMM form factor fits Supermicro H13SSH-E slots
  • Major OEM Samsung Micron Hynix chips ensure enterprise-grade reliability

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-618K2
Capacity32GB (2 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content32GB 2X16GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I confirm the kit is running at DDR5-4800 CL40 1.10 V after installing it in my Supermicro H13SSH-E?

Enter the BIOS and verify the memory speed reads 4800 MT/s, CAS latency shows 40, and voltage is set to 1.10 V; the registered ECC modules should also report 32 GB total with ECC active.

What comes in the package and do I need any extra parts for the Supermicro H13SSH-E?

The box contains two 16 GB 288-pin DDR5 RDIMMs for a 32 GB kit; no additional cables, brackets or cooling are required for the H13SSH-E motherboard.

Should I choose the 2 × 16 GB kit or a different capacity for the H13SSH-E?

The 2 × 16 GB kit matches the board’s 1Rx8 registered ECC population rules and delivers 32 GB at the rated 4800 MT/s; other capacities would need separate verification against the manual.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.