NEMIX RAM 32GB (2x16GB) DDR5 5600 CL46 ECC Registered RDIMM Supermicro H14DST-FL memory upgrade
- 32GB (2 x 16GB)
- 288-Pin DDR5 RDIMM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
NEMIX RAM
32 GB DDR5 4800 MHz CL40 2Rx8 ECC registered RDIMM for Supermicro H14DSG-OD servers
Size 32GB
This 32GB DDR5 module runs at 4800MHz with CL40 latency and 1.1V operation. It is built as a 2Rx8 Registered ECC RDIMM for the Supermicro H14DSG-OD motherboard. The exact rank, voltage and timing match the board's memory controller so the module is recognised at full capacity and rated speed. It targets server administrators who need validated, single-slot upgrades for this platform.
The 32GB density adds a large block of ECC-protected memory per slot, letting the H14DSG-OD reach higher total capacities when multiple slots are filled. Registered buffering offloads the memory controller so every populated slot runs at the full 4800MHz data rate. Headroom ends when the board's maximum supported DIMM count or total memory limit is reached, which varies by BIOS revision and CPU configuration.
The 288-pin RDIMM form factor fits only DDR5 RDIMM slots; it will not work in UDIMM or SODIMM sockets. No heat spreader is fitted, so airflow across the modules must come from the chassis or CPU cooler. ECC and registered operation free the memory controller from electrical load and correct single-bit errors on the fly, reducing unplanned downtime. Consult the motherboard manual for approved population order and maximum supported capacity before installation.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR38400-328K1 |
| Capacity | 32GB |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 4800 (PC5 38400) |
| CAS Latency | CL40 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 32GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
The H14DSG-OD requires registered ECC RDIMMs; this 2Rx8 CL40 1.1V DDR5-4800 kit matches that spec. Populate slots in the order shown in the board manual so the memory controller trains all channels at the rated speed.
Enter the BIOS and verify the memory frequency reads 4800 MT/s, CAS latency 40, voltage 1.10 V, and that ECC is reported as enabled. The OS should also show the full 32 GB capacity with no correctable-error warnings.
The box contains the single 32 GB 288-pin DDR5-4800 2Rx8 registered ECC RDIMM. No cables, brackets, heat spreaders or software licences are included.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?