We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 RDIMM modules without heat spreaders, 288-pin, 256GB kit

NEMIX RAM

NEMIX RAM MR44800-724K2 256GB (2x128GB) DDR5 5600 ECC RDIMM memory upgrade

SKU CH-V8FQ-CY5G0

256GB DDR5 5600 ECC RDIMM kit (2x128GB) with CL46, 1.1V, 2Rx4 registered design for GIGABYTE MS34-CP0 servers

  • Capacity256GB (2 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 256GB 2X128GB

Show 18 more configurations
  • 256 GB total capacity from two 128 GB modules for high-density server workloads
  • DDR5 5600 speed with PC5-44800 bandwidth for fast data throughput
  • ECC and registered design corrects errors and reduces controller load for enterprise stability
  • 1 V operation at CL46 latency matches platform specifications for reliable performance
  • 288-pin RDIMM form factor verified for GIGABYTE MS34-CP0 motherboard compatibility

Exact DDR5-5600 RDIMM kit for GIGABYTE MS34-CP0

This 256GB kit delivers two 128GB DDR5 registered ECC modules rated at 5600 MT/s with CL46 latency and 1.10V operation. It is built for the GIGABYTE MS34-CP0 motherboard where the memory controller expects 2Rx4 registered DIMMs at this exact speed and voltage. The matching rank structure and timing allow the server to recognise the full 256GB capacity and run at the rated data rate without downclocking.

288-pin RDIMM installation follows the board manual

Each module uses the standard 288-pin DDR5 RDIMM form factor with registered buffering and ECC, so it seats only in slots wired for registered memory. The motherboard manual specifies the supported population order and maximum capacity per channel; deviating from that order is the most common reason the system fails to POST or shows reduced capacity. Verify the approved slot sequence before inserting the pair and ensure the latches engage fully on both sides.

Registered ECC design sustains full-speed operation

The registered architecture buffers address and command signals, reducing electrical load on the memory controller when all slots are populated. Combined with on-die ECC, this allows the kit to maintain 5600 MT/s throughput continuously under heavy multi-threaded workloads without accumulating correctable errors that would otherwise trigger throttling or corrective resets. The 1.10V operating voltage remains stable during extended runs, supporting consistent bandwidth for virtualisation, database, and compute tasks.

Highlights

  • 256 GB total capacity from two 128 GB modules for high-density server workloads
  • DDR5 5600 speed with PC5-44800 bandwidth for fast data throughput
  • ECC and registered design corrects errors and reduces controller load for enterprise stability
  • 1 V operation at CL46 latency matches platform specifications for reliable performance
  • 288-pin RDIMM form factor verified for GIGABYTE MS34-CP0 motherboard compatibility

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-724K2
Capacity256GB (2 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 2X128GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I confirm the kit is running at DDR5 5600 with CL46 after installation?

Enter the system BIOS or UEFI and verify the memory frequency shows 5600 MT/s and CAS latency reads 46; the registered ECC design also lets the OS report corrected errors if any occur.

What exactly ships in the box and do I need anything else to install it?

The package contains two 128 GB DDR5 5600 RDIMMs for a total of 256 GB; no heat spreaders, cables or tools are included, so only a compatible 288-pin RDIMM slot on the GIGABYTE MS34-CP0 motherboard is required.

Why choose the 256 GB (2×128 GB) 2Rx4 kit instead of a different capacity or rank?

This 2Rx4 Registered ECC kit matches the MS34-CP0's qualified population rules, delivers the full 256 GB at the board's native 5600 MT/s speed, and avoids the reduced frequencies that can appear with other rank or capacity combinations.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.