我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Two green DDR4 ECC RDIMM sticks, 288-pin, black chips, silver contacts

A-Tech

A-Tech 32GB (2x16GB) DDR4 2933 ECC RDIMM 1Rx4 server RAM

SKU CH-5S1E-9ETDP

Two 16 GB DDR4 2933 ECC registered DIMMs, single rank x4, for servers and workstations

  • Capacity32GB (2 x 16GB)
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered

Capacity 32GB (2 x 16GB)

  • 32 GB dual-channel kit doubles server memory capacity
  • ECC registered DIMM detects and corrects data errors automatically
  • Single-rank 1Rx4 layout improves signal integrity at speed
  • DDR4 2933 MHz CL21 delivers high throughput for heavy workloads
  • 2 V standard voltage reduces power draw per module

32GB DDR4 2933 ECC RDIMM Kit

This 32GB kit contains two 16GB DDR4 2933 ECC registered DIMMs built for servers and workstations. Each module runs at 1.2V with CL21 latency and a single-rank x4 organisation. The 288-pin form factor fits DDR4 RDIMM slots only and is not compatible with desktop or laptop platforms.

Thermals noise and power draw

Registered ECC modules operate at the standard 1.2V DDR4 voltage, keeping power draw low in typical server workloads. Passive cooling via system airflow is sufficient; no active fan or additional heatsink is required on the modules themselves. Acoustic impact is negligible inside a properly ventilated chassis.

Upgrade path and value

This kit replaces lower-capacity or non-ECC DDR4 RDIMMs in dual-channel server boards that support 2933 MHz registered memory. The jump is worth it when workloads demand larger error-corrected memory pools for virtualisation, databases or compute clusters. Systems limited to unbuffered DIMMs or non-ECC operation cannot use these modules.

商品特色

  • 32 GB dual-channel kit doubles server memory capacity
  • ECC registered DIMM detects and corrects data errors automatically
  • Single-rank 1Rx4 layout improves signal integrity at speed
  • DDR4 2933 MHz CL21 delivers high throughput for heavy workloads
  • 2 V standard voltage reduces power draw per module

商品規格

BrandA-Tech
SeriesA-Tech DDR4 Server Memory RAM
ModelA-Tech 16GB 1Rx4 PC4-2933Y-R
Capacity32GB (2 x 16GB)
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
Multi-channel KitDual Channel Kit
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

其他版本

同系列還有 5 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

How do I install these 288-pin DDR4 RDIMMs and which slot-population rule do builders often miss?

Power down, open the chassis, align each module's notch with the 288-pin DDR4 slot key, press firmly until both retention clips click, then populate identical channels per the motherboard manual — mixing ranks across channels is the common error.

What maintenance or replacement will this 32GB ECC RDIMM kit need over its service life?

No scheduled maintenance is required; ECC corrects single-bit errors on the fly, so replacement only occurs if a module fails or a future platform demands a different DDR generation or higher speed than 2933 MT/s.

What limit appears first when this CL21 1.2V registered kit runs sustained workloads?

The JEDEC 2933 MT/s data rate and CL21 latency set the throughput ceiling; registered buffering adds one cycle, so memory bandwidth saturates before the 1.2 V supply or thermal envelope becomes a constraint.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。