我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Two green DDR4 ECC SODIMM sticks with black chips, no heat spreader

A-Tech

A-Tech 8GB (2x4GB) DDR4 2400 ECC SODIMM CL17 1.2V 260-Pin Kit

SKU CH-9TKN-7KC8Z

Dual-channel 8 GB DDR4 ECC SODIMM kit running at 2400 MHz with CL17 latency and 1.2 V operation

  • Capacity8GB (2 x 4GB)
  • Type260-Pin DDR4 SO-DIMM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCYes

Capacity 8GB (2 x 4GB)

  • 8GB (2 x 4GB)
  • 4GB
  • ECC protects data integrity in critical workloads
  • 8GB dual-channel kit (2×4GB) DDR4 2400 CL17 1.2V
  • 260-pin SODIMM fits compatible laptops and microservers
  • Single-rank 1Rx8 layout aids stability on supported platforms
  • Rigorously tested modules with major-brand DRAM ICs

ECC DDR4 SODIMM for workstations

This 8 GB kit contains two 4 GB unbuffered ECC SODIMM modules built for DDR4 systems that require error-correcting memory. It targets microservers, mobile workstations and NAS units where data integrity matters more than raw speed. The dual-channel pair installs in standard 260-pin slots.

Limited to DDR4 2400 ECC platforms

The modules run at DDR4 2400 (PC4-19200) with CL17 latency at 1.2 V. Systems that do not support ECC SODIMM or that lock memory to a lower speed will not benefit from the error-correction feature. Compatibility must be confirmed against the platform's qualified-vendor list before installation.

Single-rank 1Rx8 organisation

Each module uses a 1Rx8 single-rank layout, which determines how the memory controller addresses the chips. Boards that require dual-rank modules or a different rank-per-channel population rule will not recognise the full capacity. Check the system manual for supported rank configurations.

商品特色

  • ECC protects data integrity in critical workloads
  • 8GB dual-channel kit (2×4GB) DDR4 2400 CL17 1.2V
  • 260-pin SODIMM fits compatible laptops and microservers
  • Single-rank 1Rx8 layout aids stability on supported platforms
  • Rigorously tested modules with major-brand DRAM ICs

商品規格

BrandA-Tech
SeriesA-Tech DDR4 ECC SODIMM Memory RAM
ModelA-Tech 4GB 1Rx8 PC4-2400T-T ECC SODIMM RAM Kit
Part NumberNE-SS-1626
Capacity8GB (2 x 4GB)
Type260-Pin DDR4 SO-DIMM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
Heat SpreaderNo
FeaturesMajor Brand DRAM IC Chips / ECC Error Correcting Technology
Recommend UseAMD & Intel Compatible
OptionMajor Brand DRAM IC Chips

其他版本

同系列還有 5 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

Should I choose the 2x4GB kit or look for a single 8GB module?

The 2x4GB dual-channel kit lets the memory controller interleave data across both modules, giving higher bandwidth than a single 8GB stick at the same 2400 MT/s speed.

What does the 2400 MT/s rating deliver once the modules are installed?

The system will transfer data at up to 2400 million transfers per second per channel, which is the PC4-19200 bandwidth class, provided the platform also supports that rate.

Is the 260-pin DDR4 SO-DIMM interface the limiting factor for speed?

The 260-pin DDR4 SO-DIMM form factor carries the 2400 MT/s signal defined by the PC4-19200 standard; the platform's memory controller ultimately caps the operating frequency.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。