我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

Corn Electronics

Corn Electronics MOD3 Full Tower PC Case EATX 400mm GPU 170mm Cooler

SKU CH-37HW-YTSTK MPN MOD3

Full-tower chassis supporting EATX motherboards, 400mm graphics cards and 170mm CPU coolers with room for 360mm radiators and tempered-glass side panel

  • TypeATX Full Tower
  • Motherboard CompatibilityMicro ATX / ATX / Extended ATX
  • Side Panelwith Side Window
  • Internal 3.5" Drive Bays1
  • Internal 2.5" Drive Bays3
  • Expansion Slots7

Options Demon Slayer

  • Batman
  • Stitch
  • Purple
  • Pokemon
  • Demon Slayer
  • Gumdam RX-78-2

被劃上刪除線的選項確實存在,但本站並無供貨。

  • Supports extended ATX boards for high-end builds
  • Fits graphics cards up to 400mm long
  • Accommodates CPU coolers up to 170mm tall
  • Tempered glass side panel shows internal components
  • Front panel includes two USB 3.0 ports

Build Platform

The Corn Electronics MOD3 is a full-tower chassis designed for custom water-cooling loops and showcase builds. Its aluminium-magnesium frame and four-millimetre tempered glass panels create a rigid structure that weighs eight kilograms. The layout supports Extended ATX, ATX, Micro-ATX and Mini-ITX motherboards, giving enthusiasts a wide choice of platforms. Front I/O provides two USB 3.0 ports plus separate audio and microphone jacks.

Sustained Thermal Load

Seven expansion slots and room for a graphics card up to four hundred millimetres long allow high-end GPUs to breathe under continuous load. The top and front each accept three 120-millimetre fans, while radiator mounts handle 120, 240 or 360-millimetre units for liquid cooling. A CPU cooler height limit of one hundred and seventy millimetres accommodates most tower air coolers. The power supply bay fits standard ATX units up to one hundred and ninety-five millimetres deep.

Pre-Install Checklist

Verify that your motherboard form factor matches the supported list and that your graphics card length stays within the four-hundred-millimetre maximum. Confirm the CPU cooler height does not exceed one hundred and seventy millimetres. Ensure the power supply depth is no greater than one hundred and ninety-five millimetres. The drive configuration allows either two 2.5-inch SSDs plus one 3.5-inch HDD or three 2.5-inch SSDs.

商品特色

  • Supports extended ATX boards for high-end builds
  • Fits graphics cards up to 400mm long
  • Accommodates CPU coolers up to 170mm tall
  • Tempered glass side panel shows internal components
  • Front panel includes two USB 3.0 ports

商品規格

ModelMOD3
TypeATX Full Tower
Motherboard CompatibilityMicro ATX / ATX / Extended ATX
Side Panelwith Side Window
Internal 3.5" Drive Bays1
Internal 2.5" Drive Bays3
Expansion Slots7
Front PortsUSB3.0*2/AUDIO*1/MIC*1
Fan OptionsTop: 3×120mm Fan Front:3×120mm Fan
Radiator Options360/240/120
Max GPU Length400mm
Max CPU Cooler Height170mm
Max PSU LengthATX(195mm)
Dimensions232MM (W) * 647MM (D) * 620MM (H)
Weight8KG

其他版本

同系列還有 1 款

同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

How much noise and heat should I expect when the top and front 120 mm fan mounts are all populated and running continuously?

With up to six 120 mm fans installed the case moves a large volume of air, so component temperatures stay low; actual noise depends on the fan models you choose and the speed curves you set in BIOS or fan-controller software.

Which power supply and motherboard form factors do I need to have on hand before this case will function?

You need a standard ATX power supply no longer than 195 mm and a motherboard that fits Micro ATX, ATX or Extended ATX — the case accepts all three.

Will my existing 360 mm radiator and full-length graphics card fit together in this chassis without interference?

Yes — the top supports a 360 mm radiator and the GPU clearance is 400 mm, so a 360 mm AIO and a 400 mm card can be installed simultaneously.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。