我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

Crucial

Crucial CT51272BA186DJ 4GB DDR3 1866 ECC Unbuffered Server RAM

SKU CH-EXKT-SMQ4V MPN CT51272BA186DJ

A 4GB DDR3 1866 ECC unbuffered DIMM with CL13 latency and 1.50V operation for server memory upgrades

  • Capacity4GB
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1866 (PC3 14900)
  • CAS LatencyCL13
  • Voltage1.50V
  • ECCYes
  • ECC protection guards data integrity with 72-bit error correction
  • 1866 MT/s DDR3 speed moves data faster than 1333 standard
  • CL13 latency cuts wait cycles for quicker response
  • Unbuffered design connects directly to the memory controller
  • 4 GB capacity adds headroom for virtualisation workloads

4GB DDR3 1866 ECC Module

This Crucial CT51272BA186DJ is a 4GB DDR3 1866 ECC unbuffered DIMM built for server platforms that require error-correcting memory. It operates at 1.50V with a CAS latency of CL13 and uses a 240-pin interface. The module is sold new as a single stick ranked 1Rx8.

Upgrade From Slower DDR3

Replacing older DDR3 1066 or 1333 modules with this 1866 speed part increases memory bandwidth where the platform supports it. The jump is worth it when the motherboard and CPU memory controller are qualified for PC3 14900 operation and the system can utilise ECC protection.

Verify 240-Pin DDR3 Slots

Confirm the motherboard has 240-pin DDR3 DIMM slots and a DDR3-enabled chipset before ordering. DDR3 modules will not fit DDR2 or DDR sockets. Ensure the platform accepts unbuffered ECC DIMMs rather than registered or fully buffered types.

商品特色

  • ECC protection guards data integrity with 72-bit error correction
  • 1866 MT/s DDR3 speed moves data faster than 1333 standard
  • CL13 latency cuts wait cycles for quicker response
  • Unbuffered design connects directly to the memory controller
  • 4 GB capacity adds headroom for virtualisation workloads

商品規格

BrandCrucial
ModelCT51272BA186DJ
Capacity4GB
Type240-Pin DDR3 SDRAM
SpeedDDR3 1866 (PC3 14900)
CAS LatencyCL13
Voltage1.50V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
Multi-channel KitDual Channel Kit
ChipsetMajor Brand Chipset
Heat SpreaderNo
出貨重量0.07 kg
包裝尺寸155 × 122 × 13 mm

商品問答

Will the 240-pin DDR3 DIMM fit my server motherboard slot?

The module uses the standard 240-pin DDR3 form factor and requires a motherboard with DDR3-enabled chipset and matching DIMM slots; it will not fit DDR2 or DDR sockets.

What is the correct way to seat the module so the 72-bit ECC path works?

Align the notch on the gold edge connector with the key in the slot, press straight down until both side clips click, and verify the system reports 4 GB at 1866 MT/s with ECC active.

When should I plan to replace this 4 GB DDR3 1866 kit?

Replace it if memory diagnostics report correctable ECC errors that increase over time, if the server fails to POST with the kit installed, or when you upgrade to a platform that no longer supports DDR3.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。