我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Black rectangular DIMM module with low-profile heat spreader, 288 gold pins along bottom edge

HP

HP HX429C17FB2/8 8GB DDR4 2933 CL17 desktop RAM

SKU CH-2QAK-AYPNK MPN HX429C17FB2/8

8 GB DDR4 desktop DIMM running at 2933 MHz with CL17 timing and a black heat spreader

  • Capacity8GB
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL17
  • Timing17-19-19
  • Voltage1.20V
  • ColorBlack

Capacity 8GB

  • 8 GB capacity adds responsive multitasking headroom
  • DDR4 2933 speed keeps data flowing smoothly
  • CL17 latency reduces wait cycles for snappier response
  • 20 V operation lowers power draw and heat
  • Black heat spreader protects chips during sustained loads

HP HyperX FURY 8GB DDR4-2933 CL17 Module

This 8GB DDR4 DIMM runs at 2933 MHz with CL17 17-19-19 timing at 1.20V. It uses a 288-pin unbuffered layout and includes a black heat spreader. The single-rank 1Rx8 design is built from eight 1G x 8-bit FBGA components. It targets desktop builders who need a straightforward capacity boost for everyday workloads.

Thermals Power and Acoustics

The integrated heat spreader dissipates heat from the eight FBGA components without requiring active cooling. Operating at the standard 1.20V DDR4 voltage keeps power draw low and eliminates the need for extra voltage headroom. With no moving parts the module adds zero acoustic noise to the system.

Upgrade Context and Fit

This module replaces an empty slot or a lower-capacity DDR4 stick in a four-slot desktop board. The jump is worthwhile when the platform supports DDR4-2933 and the user needs 8GB more usable memory for multitasking or heavier browser loads. Builders who need more storage or a second memory channel populated with a matched pair should look elsewhere.

商品特色

  • 8 GB capacity adds responsive multitasking headroom
  • DDR4 2933 speed keeps data flowing smoothly
  • CL17 latency reduces wait cycles for snappier response
  • 20 V operation lowers power draw and heat
  • Black heat spreader protects chips during sustained loads

商品規格

BrandHyperX
SeriesFURY
ModelHX429C17FB2/8
Capacity8GB
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL17
Timing17-19-19
Voltage1.20V
ColorBlack
Heat SpreaderYes
FeaturesHyperX HX429C17FB2/8 is a 1G x 64-bit (8GB) DDR4-2933 CL17 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 1G x 8-bit FBGA components per module. Each module supports Intel Extreme Memory Profiles (Intel XMP) 2.0. Each module has been tested to run at DDR4-2933 at a low latency timing of 17-19-19 at 1.2V.

其他版本

同系列還有 3 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

How do I install the 288-pin DIMM and what step do people get wrong?

Align the notch on the module with the key in the motherboard slot, press straight down until both side clips click, and verify the module sits flush; the common mistake is seating only one side so the opposite clip stays open.

What maintenance or replacement will this DDR4 module need later?

No scheduled maintenance is required; keep the heat spreader dust-free with occasional compressed air and replace the module only if memory errors appear or a capacity upgrade is desired.

What limit shows up first under sustained use on this CL17 2933 MHz kit?

The JEDEC-standard 1.20 V operating voltage and CL17-19-19 timings define the stable envelope; sustained loads will hit the rated frequency and latency ceiling before any thermal throttle occurs.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。