SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
HUADISK
1TB M.2 2280 drive delivers up to 7200 MBps read and 6400 MBps write without a heatsink for tight laptop slots
The HUADISK HYV1TBX4(GR) is a 1TB M.2 2280 internal solid state drive built for consumer desktops, laptops and PS5 consoles. It uses a PCI-Express 4.0 x4 interface with NVMe 1.4 protocol and 3D TLC NAND. Sequential reads reach up to 7200 MBps and writes up to 6400 MBps, while random performance hits 720,000 IOPS read and 800,000 IOPS write. No heatsink is attached, keeping the module slim for tight clearances.
Idle power draw is 0.66W and active consumption peaks at 8.18W, so heat output stays modest during everyday workloads. The drive is rated for an operating range of 0°C to 70°C and 5% to 95% humidity, with no moving parts to generate noise. MTBF is specified at 1,000,000 hours and endurance at 600TB written, indicating a design focused on quiet, cool reliability.
Under prolonged heavy I/O the controller can maintain high throughput until thermal limits are approached, at which point firmware throttles performance to stay within the 70°C ceiling. Because the module ships without a heatsink, sustained write runs in poorly ventilated chassis will hit that limit sooner than on drives with integrated cooling. The 600TB TBW rating and 1,000,000 hour MTBF reflect the NAND and controller durability when thermals are managed.
| Brand | HUADISK |
|---|---|
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 1TB |
| Interface | PCI-Express 4.0 x4 |
| Protocol | NVMe 1.4 |
| Max Sequential Read | Up to 7200 MBps |
| Max Sequential Write | Up to 6400 MBps |
| 4KB Random Read | Up to 720,000 IOPS |
| 4KB Random Write | Up to 800,000 IOPS |
| Terabytes Written (TBW) | 600TB |
| MTBF | 1,000,000 hours |
| HeatSink | without HeatSink |
| Power Consumption (Idle) | 0.66W |
| Power Consumption (Active) | 8.18W |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -20°C ~ +75°C |
| Operating Humidity | 5-95% |
| Height | 80.0mm |
| Width | 22.0mm |
| Depth | 2.10mm |
| Weight | 30g |
| 出貨重量 | 0.05 kg |
| 包裝尺寸 | 102 × 64 × 15 mm |
Insert the drive at an angle into the PCIe 4.0 x4 M.2 slot, press it flat, and secure it with the motherboard screw; the step often missed is tightening that screw, which keeps the NVMe 1.4 SSD from lifting and losing contact.
No routine maintenance is required; the 3D TLC NAND is rated for 600TB TBW and 1,000,000 hours MTBF, so replacement is only needed if the drive exceeds its write endurance or fails after the three-year warranty period.
The controller will throttle speeds once the drive temperature approaches the 70°C operating ceiling, because the model ships without a heatsink and active power draw reaches 8.18W under load.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
查無符合的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?