我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Green rectangular PCB module with silver components and blue potentiometer, roughly 40 by 20 mm

JacobsParts Inc.

JacobsParts Inc. XL6009 2A Boost Module DC-DC Adjustable Step Up Voltage Converter Power Supply

SKU CH-6BH7-FZAVJ

Adjustable step-up converter raises 4–32 V input to a regulated 5–35 V output at up to 2 A and 20 W with 94 % peak efficiency

  • TypeStep-Up Voltage Regulator
  • Mounting StylePCB Mount
  • Current Rating2 A
  • Power Rating20 W
  • Boosts voltage to a stable regulated output for diverse projects
  • XL6009 IC integrates MOSFET with over-temperature and over-current protection
  • Accepts 4-32V input and delivers adjustable 5-35V output up to 2A
  • Up to 94% efficiency depending on input-output voltage difference
  • Potentiometer may need up to 15 turns before output voltage changes

Step-Up Voltage Regulator Module

The JacobsParts XL6009 module converts a lower DC input into a higher regulated output for electronics projects. It accepts 4 to 32 volts input and delivers 5 to 35 volts at up to 2 amps. The board suits hobbyists and engineers building custom power rails from batteries or automotive sources. Output must always exceed input voltage.

Sustained Load Behaviour

The integrated XL6009 IC includes over-temperature and over-current protection for continuous operation. Efficiency reaches up to 94 percent depending on the voltage differential between input and output. Switching runs at 400 kilohertz with output ripple below 50 millivolts and load regulation within 0.5 percent. The potentiometer may require up to 15 turns before the output voltage begins to change.

Interface Practical Limits

The PCB-mount form factor measures 40 by 20 by 12 millimetres and handles a maximum of 20 watts. Constant-voltage regulation makes it suitable for LED strips and modules but not for driving raw LEDs directly. Input range stops at 32 volts and output caps at 35 volts, so designs needing higher boost ratios fall outside the device capability.

商品特色

  • Boosts voltage to a stable regulated output for diverse projects
  • XL6009 IC integrates MOSFET with over-temperature and over-current protection
  • Accepts 4-32V input and delivers adjustable 5-35V output up to 2A
  • Up to 94% efficiency depending on input-output voltage difference
  • Potentiometer may need up to 15 turns before output voltage changes

商品規格

BrandJacobsParts
ModelDCMOD-T
TypeStep-Up Voltage Regulator
Mounting StylePCB Mount
Current Rating2 A
Power Rating20 W

商品問答

How much heat and noise does the XL6009 boost module produce when running at 2 A continuously?

The XL6009 IC includes over-temperature protection and an integrated MOSFET. At up to 94% efficiency, only a small fraction of the 20 W maximum becomes heat. There are no moving parts, so the module is completely silent in operation.

What external parts must I already have to make this module deliver a stable 5 V output?

You need a DC source between 4 V and 32 V — for example a 3.7 V lithium cell or a 12 V battery — plus a multimeter to set the potentiometer, which may require up to 15 turns before the output voltage changes.

Will the 400 kHz switching frequency cause interference with older analog audio gear sharing the same 12 V supply?

The module operates at 400 kHz with output ripple below 50 mV. Sensitive analog circuits on the same rail may pick up switching noise, so add decoupling capacitors or a separate linear regulator for those legacy devices.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。