我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Green rectangular circuit board with gold edge connectors and black memory chips

NEMIX RAM

NEMIX RAM 8GB DDR4 2133 PC4-17000 CL15 260-pin SODIMM memory upgrade

SKU CH-WCC1-H2A5E

DDR4 2133 SODIMM adds 8 GB of non-ECC memory to the POSIFLEX XT-6315E terminal at 1.2 V and CL15 latency

  • Capacity8GB
  • SpeedDDR4 2133 (PC4 17000)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 8GB DDR4 capacity boosts POS terminal responsiveness
  • 2133MHz speed with CL15 latency handles transaction workloads
  • 2V low-voltage operation reduces heat in fanless systems
  • 260-pin SODIMM form factor fits POSIFLEX XT-6315E exactly
  • Major OEM chips from Samsung, Micron or Hynix ensure reliability

Targeted POS memory upgrade

This 8GB SODIMM module is built for the POSIFLEX XT-6315E JIVA High-End Fanless POS Terminal with Celeron Chipset. It delivers a direct DDR4 2133 upgrade for point-of-sale systems requiring reliable, low-voltage memory. The unbuffered, non-ECC design matches the platform's native requirements. Installers can add capacity without configuration changes.

Single-rank capacity for transaction workloads

The 8GB density handles typical POS software, local databases and peripheral drivers with comfortable headroom. Dual-rank 2Rx8 organisation supports the memory controller's interleaving for steady throughput at 2133 MT/s. Workloads that exceed 8GB will page to storage, increasing latency during peak checkout periods. The module fills one 260-pin slot and leaves no room for a second stick in single-slot terminals.

Low-voltage operation in fanless chassis

Rated at 1.20V, the module draws minimal power and generates little heat inside the sealed POS enclosure. Samsung, Micron or Hynix DRAM chips are stress-tested under load before shipping. No heat spreader is fitted, relying on the terminal's passive thermal design. Silent operation is maintained because the memory adds no active cooling requirement.

商品特色

  • 8GB DDR4 capacity boosts POS terminal responsiveness
  • 2133MHz speed with CL15 latency handles transaction workloads
  • 2V low-voltage operation reduces heat in fanless systems
  • 260-pin SODIMM form factor fits POSIFLEX XT-6315E exactly
  • Major OEM chips from Samsung, Micron or Hynix ensure reliability

商品規格

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 2133MHZ Non-ECC Unbuffered SODIMM
Part NumberMS17000-828K1
Capacity8GB
SpeedDDR4 2133 (PC4 17000)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL15
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR4 2133MHZ PC4-17000 2Rx8 1.2V CL15 260-PIN Non-ECC Unbuffered SODIMM

商品問答

Will this DDR4 2133 CL15 SODIMM run alongside the original memory in my POSIFLEX XT-6315E terminal?

Yes, the module matches the terminal's DDR4 2133 specification, 1.2 V voltage and CL15 timing, so it will operate at the same speed and latency as the factory-installed memory.

How can I verify the 8 GB module is recognised and running at PC4-17000 after installation?

Enter the system BIOS or UEFI and confirm the memory size shows 8 GB, speed reads 2133 MT/s and CAS latency reads 15.

Does the MS17000-828K1 package include any tools, brackets or thermal pads, or must I buy them separately?

The package contains only the 8 GB 260-pin SODIMM; no tools, brackets or thermal pads are included.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。