我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Silver rectangular enterprise SSD with U.2 connector and 15mm thick 2.5 inch form factor

Solidigm

Solidigm D7-P5520 1.92TB U.2 15mm enterprise SSD SSDPF2KX019T1OS

SKU CH-ZJ1X-NSBXC MPN SSDPF2KX019T1OS

1.92 TB U.2 15 mm enterprise SSD with PCIe 4.0, 144-layer TLC 3D NAND, up to 5300 MB/s read and 1900 MB/s write, Opal security, 2,000,000-hour MTBF

  • Form FactorU.2 15mm
  • Capacity1.92TB
  • Memory Components144L TLC 3D NAND
  • InterfacePCI-Express 4.0
  • Max Sequential ReadUp to 5300 MBps
  • Max Sequential WriteUp to 1900 MBps

Options 1.92TB, U.2 15mm, OPAL

顯示另外 2 款選項
  • High sequential read speed up to 5300 MBps for fast data access
  • High sequential write speed up to 1900 MBps for rapid data storage
  • 144L TLC 3D NAND provides 1.92TB capacity in a U.2 15mm form factor
  • Opal security support helps protect stored data
  • 2000000 hours MTBF indicates high reliability for enterprise use

Enterprise Storage Purpose

The Solidigm D7-P5520 is a 1.92TB U.2 15mm enterprise SSD built for data-centre and server workloads. It uses 144L TLC 3D NAND and a PCI-Express 4.0 interface to deliver sequential reads up to 5300 MBps and writes up to 1900 MBps. The drive targets administrators who need consistent throughput for mixed read-write applications in a 2.5-inch bay.

Opal Security Impact

Hardware-based Opal encryption secures data at rest without host software overhead. This feature simplifies compliance for regulated environments and allows instant secure erase when drives are retired. The single-pack delivery contains only the drive itself, so brackets, cables or management software licences must be sourced separately.

U.2 Installation Notes

The 15mm Z-height fits standard 2.5-inch U.2 backplanes that accept thick drives; thinner bays will reject it. Installers must verify the backplane supplies PCIe 4.0 x4 lanes and adequate airflow for sustained write loads. A common issue is connecting the drive to a backplane wired for fewer lanes, which caps performance well below the rated speeds.

商品特色

  • High sequential read speed up to 5300 MBps for fast data access
  • High sequential write speed up to 1900 MBps for rapid data storage
  • 144L TLC 3D NAND provides 1.92TB capacity in a U.2 15mm form factor
  • Opal security support helps protect stored data
  • 2000000 hours MTBF indicates high reliability for enterprise use

商品規格

BrandSolidigm
SeriesD7-P5520
ModelD7-P5520
Form FactorU.2 15mm
Capacity1.92TB
Memory Components144L TLC 3D NAND
InterfacePCI-Express 4.0
Max Sequential ReadUp to 5300 MBps
Max Sequential WriteUp to 1900 MBps
MTBF2,000,000 hours
SecurityOpal
Max Shock Resistance1,000 G (Max) at 0.5 msec
Max Vibration ResistanceOperating: 2.17 GRMS (5 - 700 Hz) Max
Non-Operating: 3.13 GRMS (5 - 800 Hz) Max
出貨重量0.45 kg
包裝尺寸203 × 152 × 127 mm

其他版本

同系列還有 5 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

How long before the 144L TLC 3D NAND reaches its write endurance limit?

The drive carries a 2,000,000 hour MTBF rating; actual write endurance depends on workload but the 1.92TB capacity provides substantial over-provisioning for mixed read-write cycles.

Does the 1900 MBps sequential write speed sustain under continuous heavy load?

The 1900 MBps figure is a maximum burst rate; sustained throughput will be limited by thermal throttling and controller firmware once the 15mm U.2 form factor reaches its thermal envelope.

How much power and heat does the PCIe 4.0 x4 interface generate during all-day operation?

The U.2 15mm design fits standard 2.5-inch hot-swap bays; power draw scales with the 5300 MBps read and 1900 MBps write activity, so sustained use increases both heat and fan demand in the chassis.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。