我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Black rackmount SATA duplicator with four front drive slots and LCD screen

Systor

Systor SYS304RMHDD-DP 1-to-4 SATA Duplicator 300MB/s

SKU CH-XPKY-NE105

Standalone rackmount duplicator copies or sanitises up to four SATA drives at 300 MB/s without a host computer

  • TypeHDD Duplicator
  • Target1 to 4
  • Buffer Memory128M
  • Supported MediaFAT16/32, NTFS, Linux(EXT2/EXT3/EXT4)
  • Data Transfer Rate300MB/s
  • Language SupportEnglish or Japanese

DATA TRANSFER RATE Rackmount - 18.0GB/min [300MB/sec]

被劃上刪除線的選項確實存在，但本站並無供貨。

TARGET SIZE 1 to 04

被劃上刪除線的選項確實存在，但本站並無供貨。

  • Standalone operation with no PC required
  • Copies up to four drives at 300 MB/s
  • Quick-copy FAT, NTFS and Linux partitions
  • DoD 5220.22-M compliant sanitisation modes
  • Supports 2.5 and 3.5 inch drives adapter-free

Rackmount SATA Duplicator 1-to-4

The Systor SYS304RMHDD-DP is a standalone rackmount duplicator that copies one SATA source drive to up to four target drives at once. It operates without a host computer and reaches a transfer rate of 300MB/s. The unit supports both 3.5" and 2.5" hard drives or solid-state drives without extra adapters. A 128MB buffer helps sustain throughput during simultaneous duplication.

For IT teams sanitising or cloning SATA drives

This duplicator suits organisations that need quick, standalone cloning of FAT16, FAT32, NTFS or Linux EXT2/EXT3/EXT4 volumes, plus whole-media copies of any format. It also provides DoD 5220.22-M compliant sanitisation for secure erase requirements. It is not for environments that require more than four targets per run, or for workflows that depend on interfaces other than SATA.

300MB/s SATA transfer rate decides fit

The single specification that determines suitability is the 300MB/s maximum copy speed across all four ports. If your project demands higher throughput or non-SATA connectivity, this model will not meet the requirement.

商品特色

  • Standalone operation with no PC required
  • Copies up to four drives at 300 MB/s
  • Quick-copy FAT, NTFS and Linux partitions
  • DoD 5220.22-M compliant sanitisation modes
  • Supports 2.5 and 3.5 inch drives adapter-free

商品規格

BrandSystor
ModelSYS304RMHDD-DP
TypeHDD Duplicator
Target1 to 4
Buffer Memory128M
Supported MediaFAT16/32, NTFS, Linux(EXT2/EXT3/EXT4)
Data Transfer Rate300MB/s
Language SupportEnglish or Japanese
DisplayLCD Screen
Operating TypeStandalone
Panel ColorBlack
Load TypeSlot
FeaturesQuick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats
Environmental SpecOperating Humidity: 15% ~ 90%

其他版本

同系列還有 5 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

How do I install drives in the Systor SYS304RMHDD-DP and what step is often missed?

Insert each 2.5 or 3.5 SATA drive directly into a slot — no adapter needed — then verify the LCD shows every target detected before starting a copy job.

What maintenance or replacement will the duplicator need over time?

The 40 mm rear fans and per-port outtake fans should be cleaned regularly and replaced if airflow drops, while the power supply is built for continuous operation.

What limit appears first during sustained duplication on this unit?

The 300 MB per second transfer ceiling (18 GB per minute) is the bottleneck; buffer memory is 128 MB and the DoD 5220.22-M erase passes add further time.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。