暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

NEMIX RAM

NEMIX RAM 384GB (12x32GB) DDR5 4800 CL40 2Rx8 ECC RDIMM Supermicro H14DSH memory upgrade

SKU CH-8RVD-XAQ97

A 384GB kit of twelve 32GB DDR5-4800 ECC registered RDIMMs built for the Supermicro H14DSH motherboard

  • Capacity384GB (12 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • 384 GB total capacity across 12 modules of 32 GB each
  • DDR5 4800 speed with CL40 latency runs at rated frequency
  • Registered ECC design offloads controller and corrects single-bit errors
  • 1 V operation at 2Rx8 rank matches server memory-controller expectations
  • 288-pin RDIMM form factor verified for Supermicro H14DSH motherboard

384GB DDR5 4800 RDIMM kit

This 384GB kit contains twelve 32GB DDR5 4800 registered ECC RDIMMs built for the Supermicro H14DSH motherboard. Each module runs at 1.1V with CL40 latency and a 2Rx8 organization that matches the board's memory controller expectations. The 288-pin form factor is the exact type the platform requires for full population.

Upgrade from smaller or mixed-capacity kits

Adding this kit replaces partial fills or mismatched modules that limit total capacity or force the controller to run at reduced speeds. The jump is worth it when the workload needs the full 384GB address space and the stability of registered ECC across every slot. Systems that cannot accept twelve RDIMMs or that require a different voltage or rank layout will not benefit.

DDR5 4800 registered ECC limits

The DDR5 4800 standard sets the baseline data rate and timing the modules operate at when fully populated. Registered buffering and ECC add latency overhead compared to unbuffered non-ECC memory but are mandatory for the platform's error-correction and signal-integrity requirements. Boards that do not support registered DDR5 RDIMMs or that cap maximum capacity below 384GB cannot use this kit.

特長

  • 384 GB total capacity across 12 modules of 32 GB each
  • DDR5 4800 speed with CL40 latency runs at rated frequency
  • Registered ECC design offloads controller and corrects single-bit errors
  • 1 V operation at 2Rx8 rank matches server memory-controller expectations
  • 288-pin RDIMM form factor verified for Supermicro H14DSH motherboard

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-328K12
Capacity384GB (12 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content384GB 12X32GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Does this kit use the 288-pin RDIMM form factor that the Supermicro H14DSH motherboard requires?

Yes, every module in the 12 x 32 GB kit is a 288-pin DDR5 RDIMM, matching the registered DIMM slots on the H14DSH board.

What is the correct population order when installing all twelve 2Rx8 modules on the H14DSH?

Follow the motherboard manual's approved DIMM population sequence; the board's memory-controller rules dictate which slots must be filled first for full 384 GB recognition.

Will the Samsung, Micron or Hynix DRAM chips on these modules need any firmware updates or scheduled replacement?

No, the DRAM components are standard JEDEC DDR5 devices; they operate at 1.1 V with CL40 timing and have no user-serviceable firmware or replacement schedule.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。